2024 Virnig Manufacturing V60 Hydraulic Snow Blade/Pusher HSBP132

Information

2024 Virnig Manufacturing V60 Hydraulic Snow Blade/Pusher HSBP132

Industrial plow with independent blade and wing control for optimal snow removal.

Features may include:

  • FREE FLOATING DESIGN AUTOMATICALLY ADAPTS TO UNEVEN GROUND IN ALL DIRECTIONS WHILE ALLOWING FULL DOWN PRESSURE
  • DUAL HYDRAULIC CROSSOVER RELIEF VALVES PROTECT THE ATTACHMENT BY ANGLING THE BLADE UPON IMPACT
  • INDEPENDENTLY ANGLE EACH WING 60° & ANGLE THE BLADE 30° LEFT OR RIGHT, FROM INSIDE THE CAB
  • POSITION BLADE & WINGS AT ANY POINT BETWEEN THOSE SHOWN BELOW
  • TRIP EDGES ON MAIN BLADE & WINGS PROTECT OPERATOR & EQUIPMENT
  • REVERSIBLE, HARDENED MAIN EDGE & AR400 WING EDGES INCREASE DURABILITY & ALLOW 5 1/2" OF WEAR

Photos

Highlights

  • Mosinee, Wisconsin
  • 2024
  • Virnig Manufacturing
  • V60 Hydraulic Snow Blade/Pusher HSBP132
  • Available
  • At Full Angle, Both Wings Open: 120.5 Inches | At Full Angle, One Wing Open: 96.5 Inches | At Full Scoop: 108.5 Inches | Main Moldboard: 74.0 Inches

    • Specifications

    • 2024
    • Virnig Manufacturing
    • V60 Hydraulic Snow Blade/Pusher
    • HSBP132
    • Implement / Attachment
    • 0.19 Inches
    • Angle (Blade / Wing): +/- 30 / 60 Degrees | Blade Oscillation: +/- 4 Degrees | Float Link Angle: +/- 5 Degrees | Cylinder Pins: 1.25 Inches | Hinge Pins Diameter: 1.563 Inches
    • Straight: 136.5 Inches
    • At Full Angle, Both Wings Open: 120.5 Inches | At Full Angle, One Wing Open: 96.5 Inches | At Full Scoop: 108.5 Inches | Main Moldboard: 74.0 Inches
    • 31.0 Inches
    • Overall, Straight: 39.5 Inches
    • Cylinder: 2.0 Inches
    • Cylinder: 8.375 Inches
    • Main: 5/8 x 8 Inches Bolt-on | Wing: 1/2 x 7 3/4 Inches AR400, Bolt-on
    • Recommended: Greater than 1800 pounds
    • Approximate: 1600 Pounds