2025 Land Pride RCR12 Series RCR1248

Information

2025 Land Pride RCR12 Series RCR1248

The RCR12 Series Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1" cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24" stump jumper.

Features may include:

Quick-Hitch Compatible
  • Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.
1" Cutting Capacity
  • These cutters offers 1" cutting capacity. See Operator's Manual for more information.
Floating Top Link
  • Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.
10 Gauge Stump Jumper
  • Allows cutter to slide over obstructions protecting the gearbox output shaft.
Skid Shoes
  • Bolt on skid shoes are available as an accessory for the 60" & 72".
Gearbox Warranty
  • 5 Year Limited Gearbox Warranty shows confidence in gearbox integrity. (Years 4 & 5 parts only including gearbox seals.)

Photos

Highlights

  • Mosinee, Wisconsin
  • 2025
  • Land Pride
  • RCR12 Series RCR1248
  • Available
  • Cutting: 1 1/4" - 10" (3.2cm. - 25.4 cm)

    • Specifications

    • 2025
    • Land Pride
    • RCR12 Series
    • RCR1248
    • Rotary Cutters
    • Recommended Tractor: 20-60 hp (14.9-44.7 kw)
    • 1.9 Pint (.9 L) With new Comer gearboxes - 1.1 Pint (0.52 L)
    • Rating Horsepower: 60 hp (44.7 kw) | Speed up beveled gears: 1:1.93 Speed-up Cast iron housing | Capacity: 80-90W EP
    • ASAE Category 3 | Protection Options: 1/2" (13 mm) Center shear bolt protection or center bolt 2 plate slip clutch
    • Tailwheel 4" x 8" Laminated tire and yoke
    • Power Take-Off: 540 rpm | Blade Tip: 13,256 fpm (67.3 mps)
    • Category l (Quick hitch ready)
    • Cutting Capacity: Grass, weeds & light brush | Deck Material Thickness: 12 Gauge (2.7 mm) | Skids: 12 Gauge (2.7 mm) (Formed in deck) | Stump Jumper: Round Pan 10 ga x 24" (61.0 cm) | Blades (2): 1/2" x 3" (13mm x 76 mm)
    • 48" (1.22 m)
    • 53 5/8" (1.36 m)
    • Including Tailwheel: 89 1/8" (2.26 m)
    • 7 1/4" (18.4 cm)
    • Cutting: 1 1/4" - 10" (3.2cm. - 25.4 cm)
    • With shear bolt driveline, laminated tire, front guard, and rear guard except as noted: 413 lbs. (187 kg)
    • Blades (2): Heat treated alloy steel Free-swinging blades | Blade Bolts: Keyed with harden flat washer and locknut
    • 1 Piece reinforced deck