LAND PRIDE EQUIPMENT - MOWER

	Land Pride AFM4014 Series Mower
	The AFM4014 is designed and built by Land Pride to provide excellent cutting quality and performance on lush type turf grasses that are located on expansive and well manicured areas such as sports fields, theme parks, fairways, turf farms, and large estates. The AFM4014 will deliver excellent performance when attached to 40-70 hp tractors. All AFM models are adapted for attachment to 540 rpm pull-type draw bar. They can be ordered with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. When you need to transport one of these mowers from one mowing site to another on a public street or right-of-way the hydraulic wing cylinders will easily lift the wing decks for a 6’-8" transport width on the AFM4014 mower.The contour following capability, highly productive cutting widths, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph. Cutting Width: 14’-0” Overall Width: 14’-3” Transport Height: 7’-7 1/2” Transport Width: 6’ - 8” Overall Length: 14’-10” Mowing Position, 12’-11” Transport Position Machine Weight: 2,560 lbs Hitch: Pull Type with Adjustable Clevis and Safety Tow Chain Tongue Support: 2,200 lb. Capacity Screw Jack Tractor Horsepower: Minimum 40 HP / Maximum 70 HP Gearbox Support: 1/4” Steel Channel Gearboxes: 540 RPM (1)-Splitter & (3)-Wing Main Driveline: (1) Category lV with Constant Velocity Wing Drivelines: (3) Category II with or without Slip Clutch Cutting Height: 3/4" to 5 1/4" (In 1/4” increments) Deck Size & Quantity: 3 each / 60” Deck Overlap: 6” Deck Thickness: 3/16” Anti-Scalp Roller: Front Center and Outside Deck Corners Blade Drive Belt: 1 B-Section Drive Belt Tension: Spring Loaded Idler with Overcenter Release Blade Bearing: Sealed Ball Bearings Blades, 3 Each per Deck: Low Lift (1/4" x 2 1/2" x 20 29/32"), Optional Blades: Medium Lift, High Lift & Mulching Blade Overlap: 1 1/4" Blade Spindle Speed: 3,362 R.P.M. Blade Tip Speed: 18,396 F.P.M. Transport Tires (2): 23 x 10.5 with Sealant Deck Tires: 10 each, Air, 18 x 9.5 with Sealant Deck Wheel Spindles: 1 1/4” w/Nylon Bushings Deck Cylinders: Dual Acting Hydraulic Outlets: 1 Set Required Wing Flex: 23 Degrees Left To Right, 22 Degrees Front To Back Center Deck Flex: 10 Degrees Left To Right, 22 Degrees Front To Back Wing Locks: Automatic with Pull Rope Release Gauge Wheel Arms: 1/4” Wall Square Tubing Turning Radius: Zero Turning Radius Mowing Capacity: @ 2mph 3.39 Acres, @ 4mph 6.78 Acres, @ 6mph 10.17 Acres
	Land Pride AFM4016 Mower
	The AFM4016 is designed and built by Land Pride to provide excellent cutting quality and performance on lush type turf grasses that are located on expansive and well manicured areas such as sports fields, theme parks, fairways, turf farms, and large estates. The AFM4016 will deliver excellent performance when attached to 40-70 hp tractors. All AFM models are adapted for attachment to 540 rpm pull-type draw bar. They can be ordered with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. When you need to transport one of these mowers from one mowing site to another on a public street or right-of-way the hydraulic wing cylinders will easily lift the wing decks for a 6’-8" transport width on the AFM4016 mowers.The contour following capability, highly productive cutting widths, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph. Cutting Width: 16'-8" Overall Width: 16'-10" Transport Height: 8'-10" Transport Width: 6’- 8” With Lock Pins Installed Overall Length: 15’-0” Mowing Position, 13’-4” Transport Position Machine Weight: 3,100 lbs Hitch: Pull Type with Adjustable Clevis and Safety Tow Chain Tongue Support: 2,200 lb. Capacity Screw Jack Tractor Horsepower: Minimum 40 HP / Maximum 70 HP Gearbox Support: 1/4” Steel Channel Gearboxes: 540 RPM (1)-Splitter & (3)-Wing Main Driveline: (1) Category lV with Constant Velocity Wing Drivelines: (3) Category II with or without Slip Clutch Cutting Height: 3/4" to 5 1/4" (In 1/4” increments) Deck Size & Quantity: 3 each / 72” Deck Overlap: 8” Deck Thickness: 3/16” Anti-Scalp Roller: Front Center and Outside Deck Corners Blade Drive Belt: 1 B-Section Drive Belt Tension: Spring Loaded Idler with Overcenter Release Blade Bearing: Sealed Ball Bearings Blades, 3 Each per Deck: Low Lift (1/4" x 2 1/2" x 25"), Optional Blades: Medium Lift, High Lift & Mulching Blade Overlap: 1 1/4" Blade Spindle Speed: 2,302 R.P.M. Blade Tip Speed: 18,340 F.P.M. Transport Tires (2): 23 x 10.5 with Sealant Deck Tires: 10 each, Air, 18 x 9.5 with Sealant Deck Wheel Spindles: 1 1/4” w/Nylon Bushings Deck Cylinders: Dual Acting Hydraulic Outlets: 1 Set Required Wing Flex: 23 Degrees Left To Right, 22 Degrees Front To Back Center Deck Flex: 10 Degrees Left To Right, 22 Degrees Front To Back Wing Locks: Automatic with Pull Rope Release Gauge Wheel Arms: 1/4” Wall Square Tubing Turning Radius: Zero Turning Radius Mowing Capacity: @ 2mph 4 Acres per Hour, @ 4mph 4 Acres per Hour, @ 6mph 12.1 Acres per Hour
	Land Pride AFM4211 Mower
	The AFM4211 All-Flex Mower is designed and built by Land Pride to provide excellent cutting quality and performance on lush type turf grasses on expansive and well manicured areas such as fairways, parks, school lawns, sports fields, and 5 acre estates. The AFM4211 requires attachment to a 30-65 hp tractor with 540 rpm PTO speed and can be ordered with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. When you need to transport from one mowing site to another the hydraulic wing cylinders will easily lift up the wing decks for a 5’-6" transport width. The contour following capability, highly productive 11’ cutting width, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph. Cutting Width: 11'-1" Overall Width: 11'- 3 1/2" Transport Height: 6'-5" Transport Width: 5'-6" At Mid Cutting Height Overall Length: 10'-11" Transport Position Machine Weight: 2,040lbs Hitch: Pull Type With Adjustable Clevis and Safety Tow Chain Tongue Support: 2,200 lb. Capacity Screw Jack Tractor Horsepower: Minimum 30 HP and Maximum 65 HP Gearbox Support: 3/8” Steel Channel Gearboxes: 540 RPM (1)-Splitter Gearbox and (3)-Wing Gearboxes Main Driveline (1): Category lll Constant Velocity With or Without Slip Clutch Wing Drivelines (3): Category II With or Without Slip Clutch Cutting Height: 1” to 5 1/2” in 1/2” increments Deck Size and Quality: 3 each at 48” Deck Overlap: 6" Deck Thickness: 3/16" Anti-Scalp Roller: Front Center and Rear Outside Deck Corners Blade Drive Belt: (1) - B-Section Drive Belt Tensioning: Spring Loaded idler Blade Bearings: Sealed Ball Bearings No of Blades Per Deck: 3 Blades Size and Type: 1/4” x 2 1/2” x 16 7/8” Medium Lift Standard, Optional Blades - Low Lift, High Lift & Mulching Blade Overlap: 1 3/16” Blade Spindle Speed: 3,628 RPM Blade Tip Speed: 16,020 FPM Discharge: Rear Transport Tires: 2 Each, 18" x 9.5", Sealant With Tapered Roller Bearings Deck Tires: 10 Each, Air 13” x 5", Sealant With Tapered Roller Bearings Deck Wheel Spindles: 1 1/4” With Nylon Bushings Deck Cylinders: Dual Acting Hydraulic Outlets Required: (1)-Set Wing Flex: 23 Degrees Left To Right, 22 Degrees Front To Back Center Deck Flex: 13 Degrees Front To Back Wing Locks: Automatic Transport Locks With Pull Rope Release Gauge Wheel Arms: 1/4” Wall Square Tubing Turning Radius: Zero Turning Radius Mowing Capacity: @ 2 MPH = 2.68 Acres Per Hour, @ 4 MPH = 5.37 Acres Per Hour, @ 6 MPH = 8.10 Acres Per Hour
	Land Pride AFM4522 Mower
	The AF4522 All-Flex Mower is designed and built by Land Pride to provide excellent cutting quality and performance on lush type turf grasses that are located on expansive and well manicured areas such as sports fields, theme parks, fairways, turf farms, and large estates. The AFM4522 requires attachment to a 65-100 hp turf tractor drawbar with 540 rpm PTO speed. It can be ordered with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. When you need to transport one of these mowers from one mowing site to another on a public street or right-of-way the hydraulic wing cylinders will easily lift the wing decks for a 9’-6" transport width. The contour following capability, highly productive 22’ cutting width, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph. Cutting Width: 21'-9" Overall Width: 22'-0" Transport Height: 11'-2" Transport Width: 9'-6" With Lock Bar Installed Overall Length: 18'-6" Mowing Position, 15'-2" Transport Position Machine Weight: 4,150lbs Hitch: Pull Type with Adjustable Clevis and Safety Tow Chain Tongue Support: 2,200lb Capacity Screw Jack Tractor Horsepower: Minimum 65 HP/ Maximum 100 HP Gearbox Support: 1/4" Steel Channel Gearboxes: 540 RPM (1)-Splitter & (3)-Wing Main Driveline: (1) Category lV with Constant Velocity Wing Drivelines: (3) Category III with Slip Clutch Cutting Height: 3/4" to 5 1/4" (In 1/4” increments) Deck Size & Quantity: 3 each @ 90” Deck Overlap: 4 1/2" Deck Thickness: 3/16" Anti-Scalp Roller: Front Center of Each Deck Blade Drive Belt: 1 C-Section Drive Belt Tension: Spring Loaded Idler with Overcenter Release Blade Bearing: Sealed Ball Bearings Blades, 3 Each Per Deck: Low Lift (5/16" x 2 1/2" x 31 17/32"), Optional Blades: Medium Lift, High Lift & Mulching Blade Overlap: 2 1/4" Blade Spindle Speed: 2,241 R.P.M. Blade Tip Speed: 18,498 F.P.M Transport Tires (2): P27560SR Deck Tires: 18 x 9.5 Air Tire, Sealant Deck Wheel Spindles: 1 1/4” w/Nylon Bushings Deck Cylinders: Dual Acting Hydraulic Outlets: 1 Set Required Wing Flex: 23 Degrees Left To Right, 22 Degrees Front To Back Center Deck Flex: 10 Degrees Left To Right, 22 Degrees Front To Back Wing Locks: Automatic with Pull Rope Release Gauge Wheel Arms: 1/4" Wall Square Tubing Turning Radius: Zero Turning Radius Mowing Capacity: @ 2mph 5.27 Acres per Hour, @ 4mph 10.54 Acres per Hour, @ 6mph 15.82 Acres per Hour
	Land Pride FDR1648 Mower
	The Land Pride FDR16 Rear Discharge Grooming Mowers are designed and built with the homeowner in mind, to provide high productivity and excellent cutting quality on well maintained lawn and turf surfaces. These mowers are adapted for category 1 attachment and operation on 15- 30 hp compact utility tractors. They are offered with 48”, 60” and 72” rear discharge cutting decks, which makes them well suited to meet the mowing needs of home and estate owners alike. These rear discharge cutting decks will provide a superb quality of cut and superior clipping distribution when grass is cut on a frequent basis and ground conditions are not wet. Maximum HP - Engine: 30 HP Cutting Width: 48" Overall Width: 51" Height: 34" Length: 57" Weight (Air Tires): 486lbs Cutting Height (1/2" increments): 3/4" - 3 1/4" Deck Material Thickness: 3/16" Blade Tip Speed: 16,203 FPM Blade Construction -3 ea.: 1/4” x 2 1/2” x 16 7/8”, Heat Treated Alloy Steel Blade Options: Standard Blades: Medium Lift, Optional Blades: Low Lift, High Lift & Mulching Blade Overlap: 1 1/4" Blade Spindles: 1 3/8" dia., Cast Iron Greasable Hubs Discharge: Rear Hitch: Category I Lower Hitch: Floating Top Link: Floating Castered Gauge Wheels: 3 1/4" x 10" Solid Rubber Caster Wheel Spindle: 1" Diameter with Nylon Bushing Drive Train: 540 RPM PTO, Cast Iron Housing Gearbox With Beveled Gears, 1:2.83 Ratio Spring Loaded Single V-Belt Driveline: Heavy-Duty w/quick coupler, ASAE Cat 2 Front Roller: Optional Quick Hitch Adaptable: No
	Land Pride FDR1660 Mower
	The Land Pride FDR16 Rear Discharge Grooming Mowers are designed and built with the homeowner in mind, to provide high productivity and excellent cutting quality on well maintained lawn and turf surfaces. These mowers are adapted for category 1 attachment and operation on 15- 30 hp compact utility tractors. They are offered with 48”, 60” and 72” rear discharge cutting decks, which makes them well suited to meet the mowing needs of home and estate owners alike. These rear discharge cutting decks will provide a superb quality of cut and superior clipping distribution when grass is cut on a frequent basis and ground conditions are not wet. Maximum HP - Engine: 30 HP Cutting Width: 60" Overall Width: 63" Height: 34" Length: 64" Weight (Air Tires): 577lbs Cutting Height (1/2" increments): 3/4" - 5 1/4" Deck Material Thickness: 3/16" Blade Tip Speed: 18,195 FPM Blade Construction -3 ea.: 1/4” x 2 1/2” x 21” Heat, Treated Alloy Steel Blade Options: Standard Blades: Medium Lift, Optional Blades: Low Lift, High Lift & Mulching Blade Overlap: 1 1/4" Blade Spindles: 1 3/8" dia., Cast Iron Greasable Hubs Discharge: Rear Hitch: Category I Lower Hitch: Floating Top Link: Floating Castered Gauge Wheels: 3 1/4" x 10" Solid Rubber Caster Wheel Spindle: 1" Diameter with Nylon Bushing Drive Train: 540 RPM PTO, Cast Iron Housing Gearbox With Beveled Gears, 1:2.83 Ratio Spring Loaded Single V-Belt Driveline: Heavy-Duty w/quick coupler, ASAE Cat 2 Front Roller: Optional Quick Hitch Adaptable: Yes
	Land Pride FDR1672 Mower
	The Land Pride FDR16 Rear Discharge Grooming Mowers are designed and built with the homeowner in mind, to provide high productivity and excellent cutting quality on well maintained lawn and turf surfaces. These mowers are adapted for category 1 attachment and operation on 15- 30 hp compact utility tractors. They are offered with 48”, 60” and 72” rear discharge cutting decks, which makes them well suited to meet the mowing needs of home and estate owners alike. These rear discharge cutting decks will provide a superb quality of cut and superior clipping distribution when grass is cut on a frequent basis and ground conditions are not wet. Maximum HP - Engine: 30 HP Cutting Width: 72" Overall Width: 75" Height: 34" Length: 69" Weight (Air Tires): 619lbs Cutting Height (1/2" increments): 3/4" - 5 1/4" Deck Material Thickness: 3/16" Blade Tip Speed: 18,130 FPM Blade Construction -3 ea.: 1/4” x 2 1/2” x 25” Heat, Treated Alloy Steel Blade Options: Standard Blades: Medium Lift, Optional Blades: Low Lift, High Lift & Mulching Blade Overlap: 1 1/4" Blade Spindles: 1 3/8" dia., Cast Iron Greasable Hubs Discharge: Rear Hitch: Category I Lower Hitch: Floating Top Link: Floating Castered Gauge Wheels: 3 1/4" x 10" Solid Rubber Caster Wheel Spindle: 1" Diameter with Nylon Bushing Drive Train: 540 RPM PTO, Cast Iron Housing Gearbox With Beveled Gears, 1:2.83 Ratio Spring Loaded Single V-Belt Driveline: Heavy-Duty w/quick coupler, ASAE Cat 2 Front Roller: Optional Quick Hitch Adaptable: Yes
	Land Pride FDR2572 Mower
	Land Pride’s 25 Series Rear Discharge Grooming Mower is perfect for homeowners, campuses, parks and golf courses. The tapered rear design does away with chains that tend to clump damp grass and leave it lying in piles. The rear discharge feature allows for cleaner mowing as clippings are evenly discharged close behind the mower avoiding streets, sidewalks and landscaping. The FDR25 Series also features a floating 3-point system to allow for excellent ground following capabilities. Maximum HP - Engine: 50 HP Cutting Width: 72" Overall Width: 77" Height: 34" Length: 69" Weight: 718lbs Cutting Height: 3/4" - 5 1/4" (1/2" increments) Deck Material Thickness: 3/16" Blades-3 Medium lift, Optional blades Low Lift, High Lift or Mulching: 1/4” x 2 1/2” x 25” Heat Treated Alloy Steel Blade Overlap: 1 1/4" Blade Spindles: Greasable Blade Tip Speed: 18,130 FPM Hitch: Category 1 Gauge Wheels: 3 1/4" x 10" Solid Rubber Caster Wheel Spindle: 1" Diameter with Greasable Bushing Drive Train: 540 RPM PTO, Gearbox, 1:2.83 Ratio, Cast Iron Housing, Spring Loaded Single V-Belt Driveline: Heavy-Duty w/ quick coupler Front Roller: Optional
	Land Pride FDR2584 Mower
	Land Pride’s 25 Series Rear Discharge Grooming Mower is perfect for homeowners, campuses, parks and golf courses. The tapered rear design does away with chains that tend to clump damp grass and leave it lying in piles. The rear discharge feature allows for cleaner mowing as clippings are evenly discharged close behind the mower avoiding streets, sidewalks and landscaping. The FDR25 Series also features a floating 3-point system to allow for excellent ground following capabilities. Maximum HP - Engine: 50 HP Cutting Width: 84" Overall Width: 89" Height: 34" Length: 75" Weight: 812lbs Cutting Height: 3/4" - 5 1/4" (1/2" increments) Deck Material Thickness: 3/16" Blades-3 Medium Lift, Optional blades Low Lift, High Lift or Mulching: 1/4” x 2 1/2” x 29” Heat Treated Alloy Steel Blade Overlap: 1 1/4" Blade Spindles: Greasable Blade Tip Speed: 17,210 FPM Hitch: Category 1 Gauge Wheels: 4" x 11" Semi Solid Caster Wheel Spindle: 1" Diameter with Greasable Bushing Drive Train: 540 RPM PTO, Gearbox, 1:2.83 Ratio, Cast Iron Housing, Spring Loaded Single V-Belt Driveline: Heavy-duty w/ quick coupler Front Roller: Optional
	Land Pride FDR3590 Mower
	Land Pride’s FDR3590 Rear Discharge Grooming Mower is pure muscle! Designed to take heavy commercial use, the 90" width can swallow a lot of grass in one bite. Our rear discharge area tapers down, keeping flying debris close to the ground. The strong, thick blades turn at 18,500 fpm, powered by a gearbox to match all-out performance. Max. Engine HP: 60 HP Cutting Width: 90" Overall Width: 92" Height: 40" Length: 81" Weight (Air Tires): 1026lbs Cutting Height: 3/4" to 5 1/2" in 1/2" Increments Deck Material Thickness: 3/16" Blades-3: 5/16" x 2 1/2" x 31 1/2" Medium lift - Hardened Blade Overlap: 2 1/4" Blade Tip Speed: 18,5000 F.P.M. Blade Spindles: Cast Iron Greasable Hubs - 1 3/8" Hitch: Category l, Lower Hitch: Floating Clevis with Plated Pins, Top Link: Floating Clevis Quick Hitch: Fits Land Pride Quick-Hitch after S/N 294658 Gauge Wheels: Castered 5" x 13" Semi-Solid Tire with Bearings Caster Wheel Spindle: 1 1/4" Diameter with Nylon Bushings Drive Train: 540 RPM PTO, Gearbox, 1:2.83 Ratio, Cast Iron Housing, Spring Loaded Single V-Belt Driveline: Heavy-Duty w/Quick Coupler Cat. 2 Optional Equipment: Front Roller
	Land Pride FM2060 Flail Mower
	Land Pride Flail Mowers are the perfect choice for schools and other recreational areas when people may be present. The unique three blade system on the 20 Series gives a nice even cut and tapered ends on the rear roller prevent gouging during tight turns. With the FM20 Series rotor working in the opposite direction of travel, the cut grass is brought up and over the rotor. Most clippings are laid down prior to the mower passing it by, which means foreign objects also have a tendency to stay inside the mower and are less likely to be discharged. The 20 Series Flail Mower offers a two position hitch for offsetting the mower, enabling closer cutting along buildings, fences or roadsides. FEATURES: • Key widths: 60” • 6 1/4” Right, centered offset hitch: The two position hitch for offsetting the mower allows closer cutting along buildings, fences or roadsides. • Gearbox HP rating: 25 - 55 HP to fit a large array of tractors • 0” – 4” Cutting height: Low cutting height allows for scalping in grasses such as Bermuda prior to overseeding. • Gearbox Warranty: One year on all components • 1” Cutting capacity: Can cut small saplings. • 4 1/4” Rotor diameter: Large rotor diameter protects against obstructions. • Reverse rotor rotation: Reverse rotation brings the cut grass up and over the rotor for a cleaner discharge. • Cat. 4 driveline with overrunning clutch: Upon disengaging the PTO, the over-running clutch allows the driveline to quit turning, while the clutch yoke, gearbox and rotor shaft slow down by their own inertia. • 3 - “B” Section belts: “B” Section belts fit snug in the sheaves, and the multiple belts ensure positive transfer of power. • 3 Fine cut knives per hanger: Helps eliminate the peak and valley cut left with many fine cut blade arrangements. • High knife tip speed: Knife tip speed of 8,705 fpm for cleaner cut. • Adjustable rear panel: Rear panel adjusts to allow stronger discharge of material. Also aids in cleaning underside of deck. • Baffles on the top inside of the deck: Keeps the cut material from clumping together, ensuring an even distribution of clippings. • Height adjusting roller: Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging during turns. • Scrapers: Standard scrapers on rear height adjusting roller. Cutting Width: 60" Overall Width: 68” Height: 37” Depth: 28” Weight: 616 lbs. Cutting Height: 0-4” Cutting Capacity: 1” Deck Material Thickness: 11 gauge Knives: Fine cut Rotor Shaft Speed: 1980 RPM Rotor Diameter: 4 1/4” Rotor Rotation: Reverse Knife Tip Speed: 8705 fpm Number of Knives: 60 Hitch Type: Category I Offset Hitch: 6 1/4” PTO Speed: 540 RPM Driveline: Cat 4 w/Over-running Clutch Gearbox Rating: 55 HP Drive Belts: (2) - “B” Section Belts Rear Roller Diameter: 5 1/2”
	Land Pride FM2072 Flail Mower
	Land Pride Flail Mowers are the perfect choice for schools and other recreational areas when people may be present. The unique three blade system on the 20 Series gives a nice even cut and tapered ends on the rear roller prevent gouging during tight turns. With the FM20 Series rotor working in the opposite direction of travel, the cut grass is brought up and over the rotor. Most clippings are laid down prior to the mower passing it by, which means foreign objects also have a tendency to stay inside the mower and are less likely to be discharged. The 20 Series Flail Mower offers a two position hitch for offsetting the mower, enabling closer cutting along buildings, fences or roadsides. FEATURES: • Key widths: 72” • 6 1/4” Right, centered offset hitch: The two position hitch for offsetting the mower allows closer cutting along buildings, fences or roadsides. • Gearbox HP rating: 25 - 55 HP to fit a large array of tractors • 0” – 4” Cutting height: Low cutting height allows for scalping in grasses such as Bermuda prior to overseeding. • Gearbox Warranty: One year on all components • 1” Cutting capacity: Can cut small saplings. • 4 1/4” Rotor diameter: Large rotor diameter protects against obstructions. • Reverse rotor rotation: Reverse rotation brings the cut grass up and over the rotor for a cleaner discharge. • Cat. 4 driveline with overrunning clutch: Upon disengaging the PTO, the over-running clutch allows the driveline to quit turning, while the clutch yoke, gearbox and rotor shaft slow down by their own inertia. • 3 - “B” Section belts: “B” Section belts fit snug in the sheaves, and the multiple belts ensure positive transfer of power. • 3 Fine cut knives per hanger: Helps eliminate the peak and valley cut left with many fine cut blade arrangements. • High knife tip speed: Knife tip speed of 8,705 fpm for cleaner cut. • Adjustable rear panel: Rear panel adjusts to allow stronger discharge of material. Also aids in cleaning underside of deck. • Baffles on the top inside of the deck: Keeps the cut material from clumping together, ensuring an even distribution of clippings. • Height adjusting roller: Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging during turns. • Scrapers: Standard scrapers on rear height adjusting roller. Cutting Width: 72" Overall Width: 80” Height: 37” Depth: 28” Weight: 660 lbs. Cutting Height: 0-4” Cutting Capacity: 1” Deck Material Thickness: 11 gauge Knives: Fine cut Rotor Shaft Speed: 1980 RPM Rotor Diameter: 4 1/4” Rotor Rotation: Reverse Knife Tip Speed: 8705 fpm Number of Knives: 72 Hitch Type: Category I Offset Hitch: 6 1/4” PTO Speed: 540 RPM Driveline: Cat 4 w/Over-running Clutch Gearbox Rating: 55 HP Drive Belts: (2) - “B” Section Belts Rear Roller Diameter: 5 1/2”
	Land Pride FM3188 Flail Mower
	Our 31 Series Flail Mowers feature the same tough components as our 41 Series, but with blades offering a fine cut. The rear roller, which acts as the cutting height gauge, has tapered ends to eliminate gouging during tight maneuvers. A formed scraper keeps the roller clean from moist grass and mud, so cutting height is not disturbed. FEATURES: • 88” Cutting width: A good cutting width for many applications. • Gearbox HP Rating: 35 - 80 HP • 7 3/4” Left & right-screw type offset hitch: Easily offset the hitch for roadsides or getting under tree limbs. • ACME threads on offset: ACME threads are deeper allowing for easy screwing adjustment. • Gearbox Warranty: One year on all components. • 540 RPM cast iron gearbox with over-running clutch: Enables the rotor to free swing to a stop when the tractor PTO has been turned off. • 1/2” – 6” Cutting height: Variable cutting heights for many uses. • 1” Cutting capacity (31 Series): Cut saplings when used in a rough setting. • Fine cutting knives (31 Series): Heavy enough to cut 1” material, yet fine enough to groom a yard. • 5 1/2” Rotor diameter: Large rotor is able to take rough conditions. • Reverse rotor rotation: Brings the cut material up and over which allows it to be dispersed more evenly. • Cat. 4 driveline: Heavy-duty driveline matches up with HP range as well as potential conditions. • 3 - “C” Section belts: “C” Section belts have more surface to pulley contact and fits deeper in the groove. • 3/16” Deck thickness: Allows the Rotary Tiller to handle rough conditions. • Baffles on top inside of deck: Keeps cut material from clumping together, ensuring an even distribution of clippings. • Hinged rear gate: Can be opened for easier discharge in heavy conditions, or left closed for greater mulching capabilities. • Height adjusting roller: Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging during turns. • Scrapers: Standard scrapers on rear height adjusting roller, keeps roller clean for consistent cutting height • High knife tip speed: Knife tip speed of 9,805 fpm for cleaner cut. Cutting Width: 88" Overall Width: 96” Height: 45” Depth: 43” Approximate Machine Weight: 1300 lbs. Cutting Capacity: 1” 2” Cutting Height: 1/2 - 6” Deck Material Thickness: 3/16” Knives: Fine Cut Knives Rotor Shaft Speed: 2140 RPM Rotor Diameter: 5 1/2” Rotor Rotation: Reverse Knife Tip Speed: 9805 fpm Number of Knives: 48 Fine cutting knives Hitch Type: Cat. l and ll offset hitch Offset Hitch: 7 3/4” Left & Right, Manual Screw-Type Driveline: Cat. 4 Belt Type: 3 - “C” Section belts Gearbox Type: 540 RPM with internal over-running Clutch Gearbox Rating: 80 HP Gearbox Lubrication: SAE EP 90W Rear Roller Diameter: 5 1/2” Brush Rake Teeth: NA
	Land Pride FM4188 Flail Mower
	Land Pride's FM41 Series Flail Mower offers 3/16" deck material and utilizes a threaded rod to easily offset the hitch by nearly 8". The gearbox incorporates an over-running clutch that enables the rotor to swing free to a stop when the tractor PTO has been turned off. The rear gate of the mower can be opened for easier discharge in heavy conditions or left closed for greater mulching capabilities. The 41 Series also offers heavy forged hammers and brush rake teeth, to shred prunings and to provide a nice clean cut in grass. 13 Adjustable brush rake teeth also keep prunings in the blade path for maximum mulching. FEATURES: • 88” Cutting width: A good cutting width for many applications. • Gearbox HP Rating: 35 - 80 HP • 7 3/4” Left & right-screw type offset hitch: Easily offset the hitch for roadsides or getting under tree limbs. • ACME threads on offset: ACME threads are deeper allowing for easy screwing adjustment. • Gearbox Warranty: One year on all components. • 540 RPM cast iron gearbox with over-running clutch: Enables the rotor to free swing to a stop when the tractor PTO has been turned off. • 1/2” – 6” Cutting height: Variable cutting heights for many uses. • 1” Cutting capacity (31 Series): Cut saplings when used in a rough setting. • 2” Cutting capacity (41 Series): 41 Series is good for chopping up tree trimmings. • Fine cutting knives (31 Series): Heavy enough to cut 1” material, yet fine enough to groom a yard. • Forged hammer knives (41 Series): Forged hammers are just right for chopping up prunings up to 2” thick, but will also groom grass in a very acceptable manner. • Brush rake teeth (41 Series Only): The adjustable brush rake teeth continually push prunings into the knife path for repeated chopping action. • 5 1/2” Rotor diameter: Large rotor is able to take rough conditions. • Reverse rotor rotation: Brings the cut material up and over which allows it to be dispersed more evenly. • Cat. 4 driveline: Heavy-duty driveline matches up with HP range as well as potential conditions. • 3 - “C” Section belts: “C” Section belts have more surface to pulley contact and fits deeper in the groove. • 3/16” Deck thickness: Allows the Rotary Tiller to handle rough conditions. • Baffles on top inside of deck: Keeps cut material from clumping together, ensuring an even distribution of clippings. • Hinged rear gate: Can be opened for easier discharge in heavy conditions, or left closed for greater mulching capabilities. • Height adjusting roller: Rear height adjusting roller with greaseable bearings and tapered ends to prevent gouging during turns. • Scrapers: Standard scrapers on rear height adjusting roller, keeps roller clean for consistent cutting height • High knife tip speed: Knife tip speed of 9,805 fpm for cleaner cut. Cutting Width: 88” Overall Width: 96” Height: 45” Depth: 43” Approximate Machine Weight: 1323 lbs. Cutting Capacity: 2” Cutting Height: 1/2 - 6” Deck Material Thickness: 3/16” Knives: Hammer Knives Rotor Shaft Speed: 2140 RPM Rotor Diameter: 5 1/2” Rotor Rotation: Reverse Knife Tip Speed: 9805 fpm Number of Knives: 24 Forged hammer knives Hitch Type: Cat. l and ll offset hitch Offset Hitch: 7 3/4” Left & Right, Manual Screw-Type Driveline: Cat. 4 Belt Type: 3 - “C” Section belts Gearbox Type: 540 RPM with internal over-running Clutch Gearbox Rating: 80 HP Gearbox Lubrication: SAE EP 90W Rear Roller Diameter: 5 1/2” Brush Rake Teeth: 13 each

[Back to the top]