LAND PRIDE EQUIPMENT - AUGER

	Land Pride HD25 - 3-Point Auger
	Our HD25 Series post hole diggers are hydraulically driven and accommodate augers ranging from 6" to 24" in diameter. They can be purchased with a bolt-on mount for mounting to the side of a bucket on a tractor front-end loader or with a boom for mounting to a category I or II 3-point hitch. The HD25 series requires a hydraulic flow system capable of producing 5 to 12 GPM. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the 3-point mounted post hole diggers. The ability to reverse the auger on hydraulic post hole diggers greatly reduces the strain on the auger and tractor when extracting the digger from the ground. The HD25 series are designed to deliver up to 700 ft/lbs. of torque to meet the heavy duty needs of nurseries, landscapers, contractors, construction companies, farmers, ranchers, and municipalities. FEATURES: • Cat. 1 or 2 Hitch: Fits a wider variety of tractors by fitting Cat. 1 & 2. • 2” Output shaft: 2” tackles the torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers. • 2 7/8” yoke tubing – schedule 40 pipe: 3/16+ wall thickness for strength and durability. • 3 ” Reinforced boom tubing: 7/32” wall tubing for strength. Hydraulic hose: Standard on 3-point model, option on bucket mount due to distance varying on tractor models. • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips. • Auger Sizes: 6”, 9”, 12”, 15”, 18” & 24” Standard LP Pengo augers. • Auger Length: 48” standard size. • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity. Hitch: Cat I or II Yoke: 2 7/8” Tubing Boom: Reinforced Tubing Hydraulic Hoses: Standard Maximum Auger RPM: 109 RPM Gallons Per Minute Rating: 5 -12 GPM @ 1500 to 3000 PSI Max torque @ 2500 PSI: 700 ft. lbs. Gearbox: 3.18:1 Ratio Output Shaft on Gearbox: 2” Driveline: Hydraulic Auger Pipe: 2 1/2” dia. Auger Flighting Thickness: 1/4” Auger Length: 48” Auger Sizes: 6”, 9”, 12”, 15”, 18” or 24” Auger Teeth: Forged, Individually Replaceable; 40 Degree Angle Installed on Flat Side; 50 Degree Angle Installed on Angled Side Number of Teeth: (6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth) Machine Weight with 6” Auger: 235 lbs. Optional Hydraulic Hoses: Not Applicable Optional Hydraulic Down Pressure Kit: Available Optional Storage Stand: Available Auger Extension Accessories: 7” and 14” Extensions Available
	Land Pride HD25 - Bucket Mount Auger
	Our HD25 Series post hole diggers are hydraulically driven and accommodate augers ranging from 6" to 24" in diameter. They can be purchased with a bolt-on mount for mounting to the side of a bucket on a tractor front-end loader or with a boom for mounting to a category I or II 3-point hitch. The HD25 series requires a hydraulic flow system capable of producing 5 to 12 GPM. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the 3-point mounted post hole diggers. The ability to reverse the auger on hydraulic post hole diggers greatly reduces the strain on the auger and tractor when extracting the digger from the ground. The HD25 series are designed to deliver up to 700 ft/lbs. of torque to meet the heavy duty needs of nurseries, landscapers, contractors, construction companies, farmers, ranchers, and municipalities. FEATURES: • Bucket Mount Option: Easily bolt mounting plate to the side of the front loader bucket, and use the bucket to help push the auger into the ground 25 Series Use with tractor hydraulic systems that pump at 5 –12 GPM, at 1500 – 3000 PSI. • 2” Output shaft: 2” tackles the torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers. • 2 7/8” yoke tubing – schedule 40 pipe: 3/16+ wall thickness for strength and durability. • 3 ” Reinforced boom tubing: 7/32” wall tubing for strength. Hydraulic hose: Standard on 3-point model, option on bucket mount due to distance varying on tractor models. • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips. • Auger Sizes: 6”, 9”, 12”, 15”, 18” & 24” Standard LP Pengo augers. • Auger Length: 48” standard size. • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity. Hitch: Bucket Mount Yoke: N/A Boom: N/A Hydraulic Hoses: Optional Maximum Auger RPM: 105 RPM Gallons Per Minute Rating: 5 -12 GPM @ 1500 to 3000 PSI Max torque @ 2500 PSI: 700 ft. lbs. Gearbox: 3.18:1 Ratio Output Shaft on Gearbox: 2” Driveline: Hydraulic Auger Pipe: 2 1/2” dia. Auger Flighting Thickness: 1/4” Auger Length: 48” Auger Sizes: 6”, 9”, 12”, 15”, 18” or 24” Auger Teeth: Forged, Individually Replaceable; 40 Degree Angle Installed on Flat Side; 50 Degree Angle Installed on Angled Side Number of Teeth: (6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth) Machine Weight with 6” Auger: 185 lbs. Optional Hydraulic Hoses: (2)-24 ft. long hoses Optional Hydraulic Down Pressure Kit: N/A Optional Storage Stand: N/A Auger Extension Accessories: 7” and 14” Extensions Available
	Land Pride HD35 - 3-Point Auger
	Our HD35 Series post hole diggers are hydraulically driven and accommodate augers ranging from 6" to 24" in diameter. They can be purchased with a bolt-on mount for mounting to the side of a bucket on a tractor front-end loader or with a boom for mounting to a category I or II 3-point hitch. The HD35 series requires a system capable of producing 10 to 25 GPM. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the 3-point mounted post hole diggers. The ability to reverse the auger on hydraulic post hole diggers greatly reduces the strain on the auger and tractor when extracting the digger from the ground. The HD35 series will deliver up to 1,605 ft/lbs. of torque when industrial duty is preferred. FEATURES • Cat. 1 or 2 Hitch: Fits a wider variety of tractors by fitting Cat. 1 & 2. • 2” Output shaft: 2” tackles the torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers. • 2 7/8” yoke tubing – schedule 40 pipe: 3/16+ wall thickness for strength and durability. • 3 ” Reinforced boom tubing: 7/32” wall tubing for strength. Hydraulic hose: Standard on 3-point model, option on bucket mount due to distance varying on tractor models. • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips. • Auger Sizes: 6”, 9”, 12”, 15”, 18” & 24” Standard LP Pengo augers. • Auger Length: 48” standard size. • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity. Hitch: Cat I or II Yoke: 2 7/8” Tubing Boom: Reinforced Tubing Hydraulic Hoses: Standard Maximum Auger: RPM 109 RPM Gallons Per Minute Rating: 10 -25 GPM @ 1500 to 3000 PSI Max torque @ 2500 PSI: 1605 ft. lbs. Gearbox: 3.18:1 Ratio Output Shaft on Gearbox: 2” Driveline: Hydraulic Auger Pipe: 2 1/2” dia. Auger Flighting Thickness: 1/4” Auger Length: 48” Auger Sizes: 6”, 9”, 12”, 15”, 18” or 24” Auger Teeth: Forged, Individually Replaceable; 40 Degree Angle Installed on Flat Side; 50 Degree Angle Installed on Angled Side Number of Teeth: (6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth) Machine Weight with 6” Auger: 235 lbs. Optional Hydraulic Hoses: Not Applicable Optional Hydraulic Down Pressure Kit: Available Optional Storage Stand: Available Auger Extension Accessories: 7” and 14” Extensions Available
	Land Pride HD35 - Bucket Mount Auger
	Our HD35 Series post hole diggers are hydraulically driven and accommodate augers ranging from 6" to 24" in diameter. They can be purchased with a bolt-on mount for mounting to the side of a bucket on a tractor front-end loader or with a boom for mounting to a category I or II 3-point hitch. The HD35 series requires a system capable of producing 10 to 25 GPM. The digging performance of the bucket mounted post hole digger can be improved in heavy hardened soil conditions by applying additional down pressure with the front-end loader. An optional hydraulic down pressure kit is available to improve the performance of the 3-point mounted post hole diggers. The ability to reverse the auger on hydraulic post hole diggers greatly reduces the strain on the auger and tractor when extracting the digger from the ground. The HD35 series will deliver up to 1,605 ft/lbs. of torque when industrial duty is preferred. FEATURES • Bucket Mount Option: Easily bolt mounting plate to the side of the front loader bucket, and use the bucket to help push the auger into the ground 35 Series Use with tractor hydraulic systems that pump at 10 – 25 GPM, at 1500 – 3000 PSI. • 2” Output shaft: 2” tackles the torque loads that can be transmitted from hard ground. Fairly standard size for the industry, fits many competitive augers. • 2 7/8” yoke tubing – schedule 40 pipe: 3/16+ wall thickness for strength and durability. • 3 ” Reinforced boom tubing: 7/32” wall tubing for strength. Hydraulic hose: Standard on 3-point model, option on bucket mount due to distance varying on tractor models. • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips. • Auger Sizes: 6”, 9”, 12”, 15”, 18” & 24” Standard LP Pengo augers. • Auger Length: 48” standard size. • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity. Hitch: Bucket Mount Yoke: N/A Boom: N/A Hydraulic Hoses: Optional Maximum Auger RPM: 105 RPM Gallons Per Minute Rating: 10 -25 GPM @ 1500 to 3000 PSI Max torque @ 2500 PSI: 1605 ft. lbs. Gearbox: 3.18:1 Ratio Output Shaft on Gearbox: 2” Driveline: Hydraulic Auger Pipe: 2 1/2” dia. Auger Flighting Thickness: 1/4” Auger Length: 48” Auger Sizes: 6”, 9”, 12”, 15”, 18” or 24” Auger Teeth: Forged, Individually Replaceable; 40 Degree Angle Installed on Flat Side; 50 Degree Angle Installed on Angled Side Number of Teeth: (6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth) Machine Weight with 6” Auger: 189 lbs. Optional Hydraulic Hoses: (2)-24 ft. long hoses Optional Hydraulic Down Pressure Kit: N/A Optional Storage Stand: N/A Auger Extension Accessories: 7” and 14” Extensions Available
	Land Pride PD10 Auger
	Land Pride offers a complete line of three-point hitch mounted & PTO driven post hole diggers that are designed to meet a wide range of customer needs and applications. From 6" post holes to 24" tree balls, and from homeowner landscaping needs to large industrial projects, one of Land Pride’s four models is just right for your application. Depending on your specific needs, our Pengo Brand Augers are offered semi-double and double flighting configuration. The PD10 Series is just right for Category 1 three-point attachment for 15 to 30hp subcompact utility tractors. This unit offers a 30" auger length and a choice of 6", 9", & 12" auger flights with cast steel fishtail tips for quick piloting and faster hole starting. Homeowners, landscapers, and rental yards will find this unit very effective for occasional duty and for working and maneuvering in tight spots. FEATURES: • Shorter yoke and boom tubing: Allows post hole digger to be used on sub compact utility tractors (i.e. BX Kubota). • Auger length: 30” Auger. • Auger flighting: 1/4” Flighting, Semi-double flight. • Cast steel auger fishtail tips: Fishtail tip is an excellent pilot point to get hole started. • Gearbox: 15 to 30 HP Horsepower (2” output shaft). • Gearbox warranty: 5 Years. • 2 7/8” Yoke tubing: Same as our 15 Series Post Hole Digger. • Down pressure kit (optional): Allows additional down force to be supplied to beam to help force digger into the ground. • Alignment handle (optional): Helps guide the auger from the tractor seat. • Post Hole Digger stand (optional): Bracket mounted to bottom of gearbox can incorporate a post hole digger stand. This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor. Tractor HP: 30 HP Flighting Thickness: 1/4” Auger Dia.: 6”, 9”, and 12” Cast fishtail tip, hardened reversible cutting teeth Hitch Cat.: I Boom Tube: 2 7/8” O.D. Yoke Tube: 2 7/8” O.D. Driveline Cat.: II Gearbox: 540 RPM 3:1 Ratio, Operating RPM: 300 Weight: 120 lbs (without Auger).
	Land Pride PD15 Auger
	hole diggers that are designed to meet a wide range of customer needs and applications. From 6" post holes to 24" tree balls, and from homeowner landscaping needs to large industrial projects, one of Land Pride’s four models is just right for your application. Depending on your specific needs, our Pengo Brand Augers are offered semi-double and double flighting configuration. The PD15 Series is designed for Category 1 three-point attachment for 20 to 40hp compact utility tractors and has a 48" auger length and a choice of 6", 9", or 12" auger flights with cast steel fishtail tips. Landscapers, rental yards, contractors, farmers, ranchers, and homeowner will find that the PD15 meets their general duty needs and applications. No matter what your post hole digging needs are, Land Pride has a model to fit your needs and application. FEATURES: • 2 7/8” Yoke tubing: 3/16” Wall thickness for strength. • Auger length: 48” Auger. • Auger flighting: 1/4” Flighting, Semi-double flight. • Cast steel auger fishtail tips: Fishtail tip is an excellent pilot point to get hole started. • Gearbox: 20 to 40 HP Horsepower (2” output shaft). • Gearbox warranty: 5 Years. • Down pressure kit (optional): Allows additional down force to be supplied to beam to help force digger into the ground. • Alignment handle (optional): Helps guide the auger from the tractor seat. • Post Hole Digger stand (optional): Bracket mounted to bottom of gearbox can incorporate a post hole digger stand. This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor. Tractor HP: 40 HP Flighting Thickness: 1/4” Auger Dia.: 6”, 9”, and 12” Cast fishtail tip, hardened reversible cutting teeth Hitch Cat.: I Boom Tube: 2 7/8” O.D. Yoke Tube: 2 7/8” O.D. Driveline Cat.: II Gearbox: 540 RPM 3.18:1 Ratio, Operating RPM: 300 Weight: 161 lbs. (without Auger)
	Land Pride PD25 Auger
	Land Pride offers a complete line of three-point hitch mounted & PTO driven post hole diggers that are designed to meet a wide range of customer needs and applications. From 6" post holes to 24" tree balls, and from homeowner landscaping needs to large industrial projects, one of Land Pride’s four models is just right for your application. Depending on your specific needs, our Pengo Brand Augers are offered semi-double and double flighting configuration. The PD25 Series is designed for Category 1 or 2 threepoint attachment for 25 to 55hp utility tractors. The PD25 has a 48" auger length and a choice of 6", 9", 12", 15", 18" or 24" auger flights with cast steel fishtail tips. Nurseries, tree farms, landscapers, contractors, construction companies, farmers, ranchers and municipalities will find the PD25 a good fit for their heavy-duty applications. No matter what your post hole digging needs are, Land Pride has a model to fit your needs and application. FEATURES: • 2 7/8” Yoke Tubing: 3/16”+ Wall thickness for strength. • 3 1/2” Reinforced boom tubing: 7/32” Wall tubing for strength. • Auger flighting: Constant thickness on flighting vs. tapered. • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips. • Gearbox HP rating: 25 Series 25-55; 35 Series 30-75 HP. • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity. • 2” Output shaft: Fits most other auger manufacturers for users who don’t need a new auger. • Cat. 3 driveline with shear-pin and radial pin: Protection against obstructions. Radial pin works like a ‘ratchet’ to continually put driving force on the auger in tough conditions. • Alignment handle (optional): Guide the auger from the tractor seat. • Down pressure kit (optional): Allows additional force to be supplied, hydraulically, to the beam to help force digger into the ground. • Post Hole Digger stand (optional): Bracket mounted to bottom of gearbox can incorporate a post hole digger stand. This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor. Tractor HP: 55 HP Flighting Thickness: 1/4” Auger Dia.: 6”, 9”, 12”, 14”, 18”, and 24” Cast fishtail tip, hardened reversible cutting teeth Hitch Cat.: I - II Boom Tube: 3 1/2” O.D. Yoke Tube: 2 7/8” O.D. Driveline Cat.: III Shear bolt - Standard; III Radial pin clutch - Optional Gearbox: 540 RPM 3.18:1 Ratio, Operating RPM: 300 Weight: 186 lbs. (without Auger)
	Land Pride PD35 Auger
	Land Pride offers a complete line of three-point hitch mounted & PTO driven post hole diggers that are designed to meet a wide range of customer needs and applications. From 6" post holes to 24" tree balls, and from homeowner landscaping needs to large industrial projects, one of Land Pride’s four models is just right for your application. Depending on your specific needs, our Pengo Brand Augers are offered semi-double and double flighting configuration. The PD35 is designed for Category 1 or 2 three-point attachment to 30-75hp tractors. This series offers a 48" auger length and 9", 12", 15", 18" or 24" auger flights with cast steel fishtail tips. The PD35 series is designed to meet the industrial duty applications of landscapers, construction companies,nurseries, ranchers and farmers. No matter what your post hole digging needs are, Land Pride has a model to fit your needs and application. FEATURES: • 2 7/8” Yoke Tubing: 3/16”+ Wall thickness for strength. • 3 1/2” Reinforced boom tubing: 7/32” Wall tubing for strength. • Auger flighting: Constant thickness on flighting vs. tapered. • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points can easily be replaced when worn or damaged. Cast steel auger fishtail tips. • Gearbox HP rating: 25 Series 25-55; 35 Series 30-75 HP. • 5 Year gearbox warranty: Shows our confidence in the gearbox integrity. • 2” Output shaft: Fits most other auger manufacturers for users who don’t need a new auger. • Cat. 3 driveline with shear-pin and radial pin: Protection against obstructions. Radial pin works like a ‘ratchet’ to continually put driving force on the auger in tough conditions. • Alignment handle (optional): Guide the auger from the tractor seat. • Down pressure kit (optional): Allows additional force to be supplied, hydraulically, to the beam to help force digger into the ground. • Post Hole Digger stand (optional): Bracket mounted to bottom of gearbox can incorporate a post hole digger stand. This allows operator to hook up and unhook from tractor more safely. Stand supports unit and will store unit when it is not on the tractor. Tractor HP: 75 HP Flighting Thickness: 1/4” Auger Dia.: 6”, 9”, 12”, 14”, 18”, and 24” Cast fishtail tip, hardened reversible cutting teeth Hitch Cat.: I - II Boom Tube: 3 1/2” O.D. Yoke Tube: 2 7/8” O.D. Driveline Cat.: III Shear bolt - Standard; III Radial pin clutch - Optional Gearbox: 540 RPM 4:1 Ratio, Operating RPM: 300 Weight: 233 lbs. (Without Auger)
	Land Pride SA35 Auger
	Use the skid steer to push the auger into the ground with Land Pride's SA35 Series Post Hole Diggers. The skid steer mounted Post Hole Diggers offer high torque output, planetary gearbox, 2" hex or 2-9/16" splined output shaft and augers sized 9" - 36". The 36" auger is perfect for planting ball rooted trees. The SA35 Series offers a higher rating of 15-25 GPM. We offer a universal fit to most skid steers and increased maneuverability as the augers are able to reach over fences or other obstructions. FEATURES: • Universal Fit: Fits most skid steers • Auger sizes: 9”, 12”, 15”, 18”, 24”, 30”, & 36” augers • Planetary gearbox: Design is a tougher, more construction grade than chain and sprocket designed gearboxes. Boxes are completely sealed with all moving parts running in oil for constant lubrication. • Gearbox warranty: 5 years on housing, gears, shafts. • Replaceable hardened steel points on auger: Hardened points will last longer than non-hardened. Points are replaceable. Fish tail tips and steel point make it easier to start a hole. • 35 Series: For 15 – 25 GPM hydraulic systems. • Output shaft options: 2” Hex shaped output shaft, or 2 9/16” shaft. Both offer high torque resistance, with the hex shaft being the heaviest available. • Auger length: 42” on 9” Auger, 48” on all others. • Maneuverability: Skid steer augers are able to reach over fences or other obstructions. Tractor: 10 - 25 GPM @ 1500 to 3000 PSI Auger Flighting Thickness: 5/16” Auger Dia.: 12”, 15” 18”, 24”, 30” and 36” Cast fishtail tip, hardened reversible cutting teeth Gearbox: 18 GPM (Gallons Per Minute) Weight: 470 lbs. without Auger

[Back to the top]