KUHN EQUIPMENT - MANURE SPREADER

	Kuhn Knight 1160 Trailer Manure Spreader
	Innovative Box Spreaders The conventional box spreaders are designed to haul and spread solid materials from feedlot and dairy operations. These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen. The rooster comb beater paddles are specifically placed for a uniform spread pattern, excellent material break-up, and dependable driveline operation. Superior Spread Performance in Solid Material • Penpack • Feedlot manure • Dairy manure • Poultry litter • Compost • Other materials Innovative Box Construction • All-welded construction • Full-width axle • Direct-pull tongue • Double-strength sides • Two-piece poly floor Poly Floor • The high-density, two-piece, solid poly floor reduces friction and winter freeze-down to provide trouble-free service and long life. • This solid floor provides more durability than individual tongue and groove boards and requires less power for unloading vs alternative floors. Box Spreader • The all-welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle tube. • The inverted U-channel cross members support the poly floor providing superior strength when dumping in heavy loads. Lower Side Frame Overlap • The lower side and frame overlap provides added strength and double protection against rust through. • Inverted U-channel cross members provide superior floor strength and reduce corrosion by eliminating trapped material. Removable Beater Assembly • The beater assembly on the 1159 model is easily removed or installed to save wear and tear on the beaters when stockpiling manure. • The entire beater assembly can be easily taken off or installed in less than 1/2 hour. Apron Shaft Assembly • This welded assembly is twice as strong as keyed sprockets that some competitive spreaders use and has no keys to shear. • The entire welded sprocket assembly can be easily removed on all models for service or replacement. Accessible Roller Chain • The simple roller chain drive for the beater driveline is easily accessible for lubrication and routine maintenance through the pivoting front door. • Built-in convenient hose storage keeps hoses off the ground and hydraulic tips clean to help eliminate oil contamination. Solid, Reliable, Long Lasting Performer • 10-year warranty on side rust-throughand poly floor • Freeze-resistant • Convenient • Simple and dependable • Spread or stockpile • Easy to service and maintain Overall Length: 310" Inside Box Length: 228" Inside Box Depth: 39" Height to Top of Upper Beater: 104" Loading Height: 100" Height with Hydraulic Endgate: 110" Inside Box Width: 81 1/2" Tread Width: 100" Ground clearance: 14" Overall Height: 112" Overall Width: 100" Unit Weight: 10,325 lbs Capacity - Cubic Feet - struck level: 430 - heaped: 625 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 16 Lower Diameter: 20" Upper Diameter: 20" Paddle Thickness: 1/2" Bolt-on Paddles: YES Apron - Number: 2 - Shaft Diameter: 2" - Sprockets: 8 tooth drop-forged steel - Chain: 667XH pintle - Slat Size: 1/4"x1 1/4"x1 3/4" - Slats per Apron: 41 - Drive: Hydraulic PTO Drive: RPM - 1000; Overload Protection: Shear-bolt Box and Trailer Construction - Front Panel and sides: 10 GA. - Floor: 3/4" Poly - Trailer Axle: Tandem - Spindles: 3 3/8" - Hubs: HD 10-bolt Trailer Tongue Weight: 12% Tractor Requirements - PTO HP: 140
	Kuhn Knight 1160 Trailer - Silage Kit Manure Spreader
	Innovative Box Spreaders The conventional box spreaders are designed to haul and spread solid materials from feedlot and dairy operations. These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen. The rooster comb beater paddles are specifically placed for a uniform spread pattern, excellent material break-up, and dependable driveline operation. Superior Spread Performance in Solid Material • Penpack • Feedlot manure • Dairy manure • Poultry litter • Compost • Other materials Innovative Box Construction • All-welded construction • Full-width axle • Direct-pull tongue • Double-strength sides • Two-piece poly floor Poly Floor • The high-density, two-piece, solid poly floor reduces friction and winter freeze-down to provide trouble-free service and long life. • This solid floor provides more durability than individual tongue and groove boards and requires less power for unloading vs alternative floors. Box Spreader • The all-welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle tube. • The inverted U-channel cross members support the poly floor providing superior strength when dumping in heavy loads. Lower Side Frame Overlap • The lower side and frame overlap provides added strength and double protection against rust through. • Inverted U-channel cross members provide superior floor strength and reduce corrosion by eliminating trapped material. Removable Beater Assembly • The beater assembly on the 1159 model is easily removed or installed to save wear and tear on the beaters when stockpiling manure. • The entire beater assembly can be easily taken off or installed in less than 1/2 hour. Apron Shaft Assembly • This welded assembly is twice as strong as keyed sprockets that some competitive spreaders use and has no keys to shear. • The entire welded sprocket assembly can be easily removed on all models for service or replacement. Accessible Roller Chain • The simple roller chain drive for the beater driveline is easily accessible for lubrication and routine maintenance through the pivoting front door. • Built-in convenient hose storage keeps hoses off the ground and hydraulic tips clean to help eliminate oil contamination. Solid, Reliable, Long Lasting Performer • 10-year warranty on side rust-throughand poly floor • Freeze-resistant • Convenient • Simple and dependable • Spread or stockpile • Easy to service and maintain Overall Length: 310" Inside Box Length: 228" Inside Box Depth: 79" Height to Top of Upper Beater: NA" Loading Height: 140" Height with Hydraulic Endgate: NA" Inside Box Width: 81 1/2" Tread Width: 100" Ground clearance: 14" Overall Height: 150" Overall Width: 100" Unit Weight: 10,325 lbs Capacity - Cubic Feet - struck level: 1030 - heaped: 1070 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 16 Lower Diameter: 20" Upper Diameter: 20" Paddle Thickness: 1/2" Bolt-on Paddles: YES Apron - Number: 2 - Shaft Diameter: 2" - Sprockets: 8 tooth drop-forged steel - Chain: 667XH pintle - Slat Size: 1/4"x1 1/4"x1 3/4" - Slats per Apron: 41 - Drive: Hydraulic PTO Drive: RPM - 1000; Overload Protection: Shear-bolt Box and Trailer Construction - Front Panel and sides: 10 GA. - Floor: 3/4" Poly - Trailer Axle: Tandem - Spindles: 3 3/8" - Hubs: HD 10-bolt Trailer Tongue Weight: 12% Tractor Requirements - PTO HP: 140
	Kuhn Knight 1160 Truck Manure Spreader
	Innovative Box Spreaders The conventional box spreaders are designed to haul and spread solid materials from feedlot and dairy operations. These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen. The rooster comb beater paddles are specifically placed for a uniform spread pattern, excellent material break-up, and dependable driveline operation. Superior Spread Performance in Solid Material • Penpack • Feedlot manure • Dairy manure • Poultry litter • Compost • Other materials Innovative Box Construction • All-welded construction • Full-width axle • Direct-pull tongue • Double-strength sides • Two-piece poly floor Poly Floor • The high-density, two-piece, solid poly floor reduces friction and winter freeze-down to provide trouble-free service and long life. • This solid floor provides more durability than individual tongue and groove boards and requires less power for unloading vs alternative floors. Box Spreader • The all-welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle tube. • The inverted U-channel cross members support the poly floor providing superior strength when dumping in heavy loads. Lower Side Frame Overlap • The lower side and frame overlap provides added strength and double protection against rust through. • Inverted U-channel cross members provide superior floor strength and reduce corrosion by eliminating trapped material. Removable Beater Assembly • The beater assembly on the 1159 model is easily removed or installed to save wear and tear on the beaters when stockpiling manure. • The entire beater assembly can be easily taken off or installed in less than 1/2 hour. Apron Shaft Assembly • This welded assembly is twice as strong as keyed sprockets that some competitive spreaders use and has no keys to shear. • The entire welded sprocket assembly can be easily removed on all models for service or replacement. Accessible Roller Chain • The simple roller chain drive for the beater driveline is easily accessible for lubrication and routine maintenance through the pivoting front door. • Built-in convenient hose storage keeps hoses off the ground and hydraulic tips clean to help eliminate oil contamination. Solid, Reliable, Long Lasting Performer • 10-year warranty on side rust-throughand poly floor • Freeze-resistant • Convenient • Simple and dependable • Spread or stockpile • Easy to service and maintain Overall Length: 257" Inside Box Length: 228" Inside Box Depth: 39" Height to Top of Upper Beater: 101" Loading Height: 97" Height with Hydraulic Endgate: 107" Inside Box Width: 81 1/2" Tread Width: 96" Ground clearance: 12" Overall Height: 109" Overall Width: 100" Unit Weight: 8100 lbs Capacity - Cubic Feet - struck level: 430 - heaped: 625 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 16 Lower Diameter: 20" Upper Diameter: 20" Paddle Thickness: 1/2" Bolt-on Paddles: YES Apron - Number: 2 - Shaft Diameter: 2" - Sprockets: 8 tooth drop-forged steel - Chain: 667XH pintle - Slat Size: 1/4"x1 1/4"x1 3/4" - Slats per Apron: 41 - Drive: Hydraulic PTO Drive: RPM - 1000; Overload Protection: Shear-bolt Box and Trailer Construction - Front Panel and sides: 10 GA. - Floor: 3/4" Poly - Trailer Axle: NA - Spindles: NA - Hubs: NA Trailer Tongue Weight: NA Tractor Requirements - PTO HP: NA
	Kuhn Knight 1160 Truck - Silage Kit Manure Spreader
	Innovative Box Spreaders The conventional box spreaders are designed to haul and spread solid materials from feedlot and dairy operations. These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen. The rooster comb beater paddles are specifically placed for a uniform spread pattern, excellent material break-up, and dependable driveline operation. Superior Spread Performance in Solid Material • Penpack • Feedlot manure • Dairy manure • Poultry litter • Compost • Other materials Innovative Box Construction • All-welded construction • Full-width axle • Direct-pull tongue • Double-strength sides • Two-piece poly floor Poly Floor • The high-density, two-piece, solid poly floor reduces friction and winter freeze-down to provide trouble-free service and long life. • This solid floor provides more durability than individual tongue and groove boards and requires less power for unloading vs alternative floors. Box Spreader • The all-welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle tube. • The inverted U-channel cross members support the poly floor providing superior strength when dumping in heavy loads. Lower Side Frame Overlap • The lower side and frame overlap provides added strength and double protection against rust through. • Inverted U-channel cross members provide superior floor strength and reduce corrosion by eliminating trapped material. Removable Beater Assembly • The beater assembly on the 1159 model is easily removed or installed to save wear and tear on the beaters when stockpiling manure. • The entire beater assembly can be easily taken off or installed in less than 1/2 hour. Apron Shaft Assembly • This welded assembly is twice as strong as keyed sprockets that some competitive spreaders use and has no keys to shear. • The entire welded sprocket assembly can be easily removed on all models for service or replacement. Accessible Roller Chain • The simple roller chain drive for the beater driveline is easily accessible for lubrication and routine maintenance through the pivoting front door. • Built-in convenient hose storage keeps hoses off the ground and hydraulic tips clean to help eliminate oil contamination. Solid, Reliable, Long Lasting Performer • 10-year warranty on side rust-throughand poly floor • Freeze-resistant • Convenient • Simple and dependable • Spread or stockpile • Easy to service and maintain Overall Length: 257" Inside Box Length: 228" Inside Box Depth: 79" Height to Top of Upper Beater: NA Loading Height: 137" Height with Hydraulic Endgate: NA Inside Box Width: 81 1/2" Tread Width: 96" Ground clearance: 12" Overall Height: 147" Overall Width: 100" Unit Weight: 8100 lbs Capacity - Cubic Feet - struck level: 1030 - heaped: 1070 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 16 Lower Diameter: 20" Upper Diameter: 20" Paddle Thickness: 1/2" Bolt-on Paddles: YES Apron - Number: 2 - Shaft Diameter: 2" - Sprockets: 8 tooth drop-forged steel - Chain: 667XH pintle - Slat Size: 1/4"x1 1/4"x1 3/4" - Slats per Apron: 41 - Drive: Hydraulic PTO Drive: RPM - 1000; Overload Protection: Shear-bolt Box and Trailer Construction - Front Panel and sides: 10 GA. - Floor: 3/4" Poly - Trailer Axle: NA - Spindles: NA - Hubs: NA Trailer Tongue Weight: NA Tractor Requirements - PTO HP: NA
	Kuhn Knight 1170 Truck Manure Spreader
	Innovative Box Spreaders The conventional box spreaders are designed to haul and spread solid materials from feedlot and dairy operations. These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen. The rooster comb beater paddles are specifically placed for a uniform spread pattern, excellent material break-up, and dependable driveline operation. Superior Spread Performance in Solid Material • Penpack • Feedlot manure • Dairy manure • Poultry litter • Compost • Other materials Innovative Box Construction • All-welded construction • Full-width axle • Direct-pull tongue • Double-strength sides • Two-piece poly floor Poly Floor • The high-density, two-piece, solid poly floor reduces friction and winter freeze-down to provide trouble-free service and long life. • This solid floor provides more durability than individual tongue and groove boards and requires less power for unloading vs alternative floors. Box Spreader • The all-welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle tube. • The inverted U-channel cross members support the poly floor providing superior strength when dumping in heavy loads. Lower Side Frame Overlap • The lower side and frame overlap provides added strength and double protection against rust through. • Inverted U-channel cross members provide superior floor strength and reduce corrosion by eliminating trapped material. Removable Beater Assembly • The beater assembly on the 1159 model is easily removed or installed to save wear and tear on the beaters when stockpiling manure. • The entire beater assembly can be easily taken off or installed in less than 1/2 hour. Apron Shaft Assembly • This welded assembly is twice as strong as keyed sprockets that some competitive spreaders use and has no keys to shear. • The entire welded sprocket assembly can be easily removed on all models for service or replacement. Accessible Roller Chain • The simple roller chain drive for the beater driveline is easily accessible for lubrication and routine maintenance through the pivoting front door. • Built-in convenient hose storage keeps hoses off the ground and hydraulic tips clean to help eliminate oil contamination. Solid, Reliable, Long Lasting Performer • 10-year warranty on side rust-throughand poly floor • Freeze-resistant • Convenient • Simple and dependable • Spread or stockpile • Easy to service and maintain Overall Length: 281" Inside Box Length: 252" Inside Box Depth: 39" Height to Top of Upper Beater: 101" Loading Height: 97" Height with Hydraulic Endgate: 107" Inside Box Width: 81 1/2" Tread Width: 96" Ground clearance: 12" Overall Height: 109" Overall Width: 100" Unit Weight: 8500 lbs Capacity - Cubic Feet - struck level: 470 - heaped: 690 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 16 Lower Diameter: 20" Upper Diameter: 20" Paddle Thickness: 1/2" Bolt-on Paddles: YES Apron - Number: 2 - Shaft Diameter: 2" - Sprockets: 8 tooth drop-forged steel - Chain: 667XH pintle - Slat Size: 1/4"x1 1/4"x1 3/4" - Slats per Apron: 45 - Drive: Hydraulic PTO Drive: RPM - 1000; Overload Protection: Shear-bolt Box and Trailer Construction - Front Panel and sides: 10 GA. - Floor: 3/4" Poly - Trailer Axle: NA - Spindles: NA - Hubs: NA Trailer Tongue Weight: NA Tractor Requirements - PTO HP: NA
	Kuhn Knight 1170 Truck - Silage Kit Manure Spreader
	Innovative Box Spreaders The conventional box spreaders are designed to haul and spread solid materials from feedlot and dairy operations. These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen. The rooster comb beater paddles are specifically placed for a uniform spread pattern, excellent material break-up, and dependable driveline operation. Superior Spread Performance in Solid Material • Penpack • Feedlot manure • Dairy manure • Poultry litter • Compost • Other materials Innovative Box Construction • All-welded construction • Full-width axle • Direct-pull tongue • Double-strength sides • Two-piece poly floor Poly Floor • The high-density, two-piece, solid poly floor reduces friction and winter freeze-down to provide trouble-free service and long life. • This solid floor provides more durability than individual tongue and groove boards and requires less power for unloading vs alternative floors. Box Spreader • The all-welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle tube. • The inverted U-channel cross members support the poly floor providing superior strength when dumping in heavy loads. Lower Side Frame Overlap • The lower side and frame overlap provides added strength and double protection against rust through. • Inverted U-channel cross members provide superior floor strength and reduce corrosion by eliminating trapped material. Removable Beater Assembly • The beater assembly on the 1159 model is easily removed or installed to save wear and tear on the beaters when stockpiling manure. • The entire beater assembly can be easily taken off or installed in less than 1/2 hour. Apron Shaft Assembly • This welded assembly is twice as strong as keyed sprockets that some competitive spreaders use and has no keys to shear. • The entire welded sprocket assembly can be easily removed on all models for service or replacement. Accessible Roller Chain • The simple roller chain drive for the beater driveline is easily accessible for lubrication and routine maintenance through the pivoting front door. • Built-in convenient hose storage keeps hoses off the ground and hydraulic tips clean to help eliminate oil contamination. Solid, Reliable, Long Lasting Performer • 10-year warranty on side rust-throughand poly floor • Freeze-resistant • Convenient • Simple and dependable • Spread or stockpile • Easy to service and maintain Overall Length: 281" Inside Box Length: 252" Inside Box Depth: 79" Height to Top of Upper Beater: NA Loading Height: 137" Height with Hydraulic Endgate: NA Inside Box Width: 81 1/2" Tread Width: 96" Ground clearance: 12" Overall Height: 147" Overall Width: 100" Unit Weight: 8500 lbs Capacity - Cubic Feet - struck level: 1135 - heaped: 1180 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 16 Lower Diameter: 20" Upper Diameter: 20" Paddle Thickness: 1/2" Bolt-on Paddles: YES Apron - Number: 2 - Shaft Diameter: 2" - Sprockets: 8 tooth drop-forged steel - Chain: 667XH pintle - Slat Size: 1/4"x1 1/4"x1 3/4" - Slats per Apron: 45 - Drive: Hydraulic PTO Drive: RPM - 1000; Overload Protection: Shear-bolt Box and Trailer Construction - Front Panel and sides: 10 GA. - Floor: 3/4" Poly - Trailer Axle: NA - Spindles: NA - Hubs: NA Trailer Tongue Weight: NA Tractor Requirements - PTO HP: NA
	Kuhn Knight 1212 Manure Spreader
	New 1200 Series Models The EasySpread box spreaders are designed to haul and spread solid materials from small dairies and stables, including gutter manure, yard scrapings and bedding pack. These spreaders are built with quality components yet are economical to meet the needs of the smaller livestock producer. The EasySpread box spreaders feature an all-steel welded box construction, one-piece solid poly floor, single T-bar apron chain, mechanical V-belt drive and a rooster comb beater. All-Steel Welded Design • The all-steel welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • The solid weld-in tongue and axle means the spreader is stronger and more dependable because the unit is pulled from the axle rather than the front of the box like some competitive spreaders. EasySpread Features • All units were designed with a low overall height for easy loading capability under barn cleaners and for use by small skid loaders. • The rooster-comb beater creates a uniform spread pattern and replaceable paddles provide easier service. • The EasySpread box spreaders have a clean, streamlined design that will set the standard for small-capacity box spreaders. • The V-belt drive design is simple and easy to maintain. The pulleys and belts are accessible for routine maintenance through the hinged front door. • The belt drive provides overload protection by simply slipping when the load to the drive becomes to great. Two-Speed Apron Gearbox - The two-speed gearbox provides flexibility to change speeds for various reasons, including application rate, material types and cleanout. One-piece Solid Poly Floor - The solid poly floor provides more strength and durability than individual tongue and grove boards or plywood coated with plastic, and requires less horse power than these alternative types of floors. Single T-bar Chain & Slat Apron - The single apron slats provide simple, low-cost, dependability and the T-bar design is easier to service compared to pintle chain. Overall 1200 EasySpread Benefits • Simple V-belt Drive • Friction-Resistant Poly Floor • Sturdy Steel Construction • Easy Adjustments • Clean Streamline Design Overall Length: 174" Inside Box Length: 96" Inside Box Depth: 22" Inside Box Width: 48" Overall Height SA / TA - Tire Option Used: 9.5L x 15 / NA - w/ Upper Beater: NA - w/ Splash Guard: 53" / NA - w/Hydraulic Endgate: 47" / NA Loading Height SA / TA: 45" / NA Tread Width SA / TA: 72" / NA Ground clearance SA / TA: 12" / NA Unit Weight SA / TA: 1600 lbs / NA Maximum Net Load: 5260 lbs Capacity - Cubic Feet - struck level: 63 - heaped: 117 Beaters - Number of Standard: 1 - Number of Paddles per Beater: 8 Diameter - Lower/upper: 26" / NA Lower Beater RPM: 350 Bolt-on Paddles: YES Beater PTO Drive: - RPM - 540 - Roller Chain-main/upper: 60/NA - Side Shaft Diameter: 1 1/4" Drive Belt Type: b Apron - Number: 1 - Shaft Diameter: 1 1/2" - Sprockets: 6-tooth - Chain: t-bar - Slat Size: 1.0 x 2.0 - Slats per Apron: 9 - Speed Selection: slow/fast/clean out - Chain Drive: 60 - Gearbox: 2-Speed Box Construction: - Front Panel & Sides: 12GA. - Floor: 1/2" poly - Trailer Axle SA/TA: SA - Spindle Diameter: 2 1/2" / NA - Hubs: 8-bolt Options: endgate, diaper pan, splash guards, lights, safety chain, wheels and tires Trailer Tongue Weight: 13% Tractor Requirements - PTO HP: 30
	Kuhn Knight 1215 Manure Spreader
	New 1200 Series Models The EasySpread box spreaders are designed to haul and spread solid materials from small dairies and stables, including gutter manure, yard scrapings and bedding pack. These spreaders are built with quality components yet are economical to meet the needs of the smaller livestock producer. The EasySpread box spreaders feature an all-steel welded box construction, one-piece solid poly floor, single T-bar apron chain, mechanical V-belt drive and a rooster comb beater. All-Steel Welded Design • The all-steel welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • The solid weld-in tongue and axle means the spreader is stronger and more dependable because the unit is pulled from the axle rather than the front of the box like some competitive spreaders. EasySpread Features • All units were designed with a low overall height for easy loading capability under barn cleaners and for use by small skid loaders. • The rooster-comb beater creates a uniform spread pattern and replaceable paddles provide easier service. • The EasySpread box spreaders have a clean, streamlined design that will set the standard for small-capacity box spreaders. • The V-belt drive design is simple and easy to maintain. The pulleys and belts are accessible for routine maintenance through the hinged front door. • The belt drive provides overload protection by simply slipping when the load to the drive becomes to great. Two-Speed Apron Gearbox - The two-speed gearbox provides flexibility to change speeds for various reasons, including application rate, material types and cleanout. One-piece Solid Poly Floor - The solid poly floor provides more strength and durability than individual tongue and grove boards or plywood coated with plastic, and requires less horse power than these alternative types of floors. Single T-bar Chain & Slat Apron - The single apron slats provide simple, low-cost, dependability and the T-bar design is easier to service compared to pintle chain. Overall 1200 EasySpread Benefits • Simple V-belt Drive • Friction-Resistant Poly Floor • Sturdy Steel Construction • Easy Adjustments • Clean Streamline Design Overall Length: 198" Inside Box Length: 120" Inside Box Depth: 22" Inside Box Width: 48" Overall Height SA / TA - Tire Option Used: 12.5L x 15 / NA - w/ Upper Beater: NA - w/ Splash Guard: 54" / NA - w/Hydraulic Endgate: 48" / NA Loading Height SA / TA: 46" / NA Tread Width SA / TA: 78" / NA Ground clearance SA / TA: 13" / NA Unit Weight SA / TA: 1800 lbs / NA Maximum Net Load: 6570 lbs Capacity - Cubic Feet - struck level: 79 - heaped: 146 Beaters - Number of Standard: 1 - Number of Paddles per Beater: 8 Diameter - Lower/upper: 26" / NA Lower Beater RPM: 350 Bolt-on Paddles: YES Beater PTO Drive: - RPM - 540 - Roller Chain-main/upper: 60/NA - Side Shaft Diameter: 1 1/4" Belt Type: b Apron - Number: 1 - Shaft Diameter: 1 1/2" - Sprockets: 6-tooth - Chain: t-bar - Slat Size: 1.0 x 2.0 - Slats per Apron: 10 - Speed Selection: slow/fast/clean out - Chain Drive: 60 - Gearbox: 2-Speed Box Construction: - Front Panel & Sides: 12GA. - Floor: 1/2" poly - Trailer Axle SA/TA: SA - Spindle Diameter: 2 1/2" / NA - Hubs: 8-bolt Options: endgate, diaper pan, splash guards, lights, safety chain, wheels and tires Trailer Tongue Weight: 13% Tractor Requirements - PTO HP: 35
	Kuhn Knight 1219 Manure Spreader
	New 1200 Series Models The EasySpread box spreaders are designed to haul and spread solid materials from small dairies and stables, including gutter manure, yard scrapings and bedding pack. These spreaders are built with quality components yet are economical to meet the needs of the smaller livestock producer. The EasySpread box spreaders feature an all-steel welded box construction, one-piece solid poly floor, single T-bar apron chain, mechanical V-belt drive and a rooster comb beater. All-Steel Welded Design • The all-steel welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • The solid weld-in tongue and axle means the spreader is stronger and more dependable because the unit is pulled from the axle rather than the front of the box like some competitive spreaders. EasySpread Features • All units were designed with a low overall height for easy loading capability under barn cleaners and for use by small skid loaders. • The rooster-comb beater creates a uniform spread pattern and replaceable paddles provide easier service. • The EasySpread box spreaders have a clean, streamlined design that will set the standard for small-capacity box spreaders. • The V-belt drive design is simple and easy to maintain. The pulleys and belts are accessible for routine maintenance through the hinged front door. • The belt drive provides overload protection by simply slipping when the load to the drive becomes to great. Two-Speed Apron Gearbox - The two-speed gearbox provides flexibility to change speeds for various reasons, including application rate, material types and cleanout. One-piece Solid Poly Floor - The solid poly floor provides more strength and durability than individual tongue and grove boards or plywood coated with plastic, and requires less horse power than these alternative types of floors. Single T-bar Chain & Slat Apron - The single apron slats provide simple, low-cost, dependability and the T-bar design is easier to service compared to pintle chain. Overall 1200 EasySpread Benefits • Simple V-belt Drive • Friction-Resistant Poly Floor • Sturdy Steel Construction • Easy Adjustments • Clean Streamline Design Overall Length: 234" Inside Box Length: 156" Inside Box Depth: 22" Inside Box Width: 48" Overall Height SA / TA - Tire Option Used: 14L x 16.1 / NA - w/ Upper Beater: NA - w/ Splash Guard: 55" / NA - w/Hydraulic Endgate: 51" / NA Loading Height SA / TA: 48" / NA Tread Width SA / TA: 81" / NA Ground clearance SA / TA: 15" / NA Unit Weight SA / TA: 2450 lbs / NA Maximum Net Load: 8505 lbs Capacity - Cubic Feet - struck level: 102 - heaped: 189 Beaters - Number of Standard: 1 - Number of Paddles per Beater: 8 Diameter - Lower/upper: 26" / NA Lower Beater RPM: 350 Bolt-on Paddles: YES Beater PTO Drive: - RPM - 540 - Roller Chain-main/upper: 60/NA - Side Shaft Diameter: 1 1/4" Belt Type: b Apron - Number: 1 - Shaft Diameter: 1 1/2" - Sprockets: 6-tooth - Chain: t-bar - Slat Size: 1.0 x 2.0 - Slats per Apron: 13 - Speed Selection: slow/fast/clean out - Chain Drive: 60 - Gearbox: 2-Speed Box Construction: - Front Panel & Sides: 12GA. - Floor: 1/2" poly - Trailer Axle SA/TA: SA - Spindle Diameter: 2 1/2" / NA - Hubs: 8-bolt Options: endgate, diaper pan, splash guards, lights, safety chain, wheels and tires Trailer Tongue Weight: 13% Tractor Requirements - PTO HP: 45
	Kuhn Knight 1224 Manure Spreader
	New 1200 Series Models The EasySpread box spreaders are designed to haul and spread solid materials from small dairies and stables, including gutter manure, yard scrapings and bedding pack. These spreaders are built with quality components yet are economical to meet the needs of the smaller livestock producer. The EasySpread box spreaders feature an all-steel welded box construction, one-piece solid poly floor, single T-bar apron chain, mechanical V-belt drive and a rooster comb beater. All-Steel Welded Design • The all-steel welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • The solid weld-in tongue and axle means the spreader is stronger and more dependable because the unit is pulled from the axle rather than the front of the box like some competitive spreaders. EasySpread Features • All units were designed with a low overall height for easy loading capability under barn cleaners and for use by small skid loaders. • The rooster-comb beater creates a uniform spread pattern and replaceable paddles provide easier service. • The EasySpread box spreaders have a clean, streamlined design that will set the standard for small-capacity box spreaders. • The V-belt drive design is simple and easy to maintain. The pulleys and belts are accessible for routine maintenance through the hinged front door. • The belt drive provides overload protection by simply slipping when the load to the drive becomes to great. Two-Speed Apron Gearbox - The two-speed gearbox provides flexibility to change speeds for various reasons, including application rate, material types and cleanout. One-piece Solid Poly Floor - The solid poly floor provides more strength and durability than individual tongue and grove boards or plywood coated with plastic, and requires less horse power than these alternative types of floors. Single T-bar Chain & Slat Apron - The single apron slats provide simple, low-cost, dependability and the T-bar design is easier to service compared to pintle chain. Overall 1200 EasySpread Benefits • Simple V-belt Drive • Friction-Resistant Poly Floor • Sturdy Steel Construction • Easy Adjustments • Clean Streamline Design Overall Length: 234" Inside Box Length: 156" Inside Box Depth: 24" Inside Box Width: 60" Overall Height SA / TA - Tire Option Used: 16.5L x 16.1 / 12.5L x 15 - w/ Upper Beater: 71" / 66" - w/ Splash Guard: 59" / 54" - w/Hydraulic Endgate: 54" / 50" Loading Height SA / TA: 52" / 47" Tread Width SA / TA: 100" / 97" Ground clearance SA / TA: 15" / 11" Unit Weight SA / TA: 2750 lbs / 3000 lbs Maximum Net Load: 10,800 lbs Capacity - Cubic Feet - struck level: 136 - heaped: 240 Beaters - Number of Standard: 1 - Number of Paddles per Beater: 10 Diameter - Lower/upper: 26" / optional 14" Lower Beater RPM: 350 Bolt-on Paddles: YES Beater PTO Drive: - RPM - 540 - Roller Chain-main/upper: 80/50 - Side Shaft Diameter: 1 1/4" Belt Type: c Apron - Number: 1 - Shaft Diameter: 1 1/2" - Sprockets: 6-tooth - Chain: t-bar - Slat Size: 1.0 x 2.0 - Slats per Apron: 13 - Speed Selection: slow/fast/clean out - Chain Drive: 80 - Gearbox: 2-Speed Box Construction: - Front Panel & Sides: 12GA. - Floor: 1/2" poly - Trailer Axle SA/TA: SA or TA - Spindle Diameter SA/TA: 2 1/2" / 2 1/2" - Hubs: 8-bolt Options: upper beater and tandem axle Trailer Tongue Weight: 13% Tractor Requirements - PTO HP: 65
	Kuhn Knight 1230 Manure Spreader
	New 1200 Series Models The EasySpread box spreaders are designed to haul and spread solid materials from small dairies and stables, including gutter manure, yard scrapings and bedding pack. These spreaders are built with quality components yet are economical to meet the needs of the smaller livestock producer. The EasySpread box spreaders feature an all-steel welded box construction, one-piece solid poly floor, single T-bar apron chain, mechanical V-belt drive and a rooster comb beater. All-Steel Welded Design • The all-steel welded construction provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • The solid weld-in tongue and axle means the spreader is stronger and more dependable because the unit is pulled from the axle rather than the front of the box like some competitive spreaders. EasySpread Features • All units were designed with a low overall height for easy loading capability under barn cleaners and for use by small skid loaders. • The rooster-comb beater creates a uniform spread pattern and replaceable paddles provide easier service. • The EasySpread box spreaders have a clean, streamlined design that will set the standard for small-capacity box spreaders. • The V-belt drive design is simple and easy to maintain. The pulleys and belts are accessible for routine maintenance through the hinged front door. • The belt drive provides overload protection by simply slipping when the load to the drive becomes to great. Two-Speed Apron Gearbox - The two-speed gearbox provides flexibility to change speeds for various reasons, including application rate, material types and cleanout. One-piece Solid Poly Floor - The solid poly floor provides more strength and durability than individual tongue and grove boards or plywood coated with plastic, and requires less horse power than these alternative types of floors. Single T-bar Chain & Slat Apron - The single apron slats provide simple, low-cost, dependability and the T-bar design is easier to service compared to pintle chain. Overall 1200 EasySpread Benefits • Simple V-belt Drive • Friction-Resistant Poly Floor • Sturdy Steel Construction • Easy Adjustments • Clean Streamline Design Overall Length: 270" Inside Box Length: 192" Inside Box Depth: 24" Inside Box Width: 60" Overall Height SA / TA - Tire Option Used: 16.5L x 16.1 / 12.5L x 15 - w/ Upper Beater: 71" / 66" - w/ Splash Guard: 59" / 54" - w/Hydraulic Endgate: 54" / 50" Loading Height SA / TA: 52" / 47" Tread Width SA / TA: 100" / 97" Ground clearance SA / TA: 15" / 11" Unit Weight SA / TA: 3300 lbs / 3575 lbs Maximum Net Load: 13,275 lbs Capacity - Cubic Feet - struck level: 167 - heaped: 295 Beaters - Number of Standard: 1 - Number of Paddles per Beater: 10 Diameter - Lower/upper: 26" / optional 14" Lower Beater RPM: 350 Bolt-on Paddles: YES Beater PTO Drive: - RPM - 540 - Roller Chain-main/upper: 80/50 - Side Shaft Diameter: 1 1/4" Belt Type: c Apron - Number: 1 - Shaft Diameter: 1 1/2" - Sprockets: 6-tooth - Chain: t-bar - Slat Size: 1.0 x 2.0 - Slats per Apron: 16 - Speed Selection: slow/fast/clean out - Chain Drive: 80 - Gearbox: 2-Speed Box Construction: - Front Panel & Sides: 12GA. - Floor: 1/2" poly - Trailer Axle SA/TA: SA or TA - Spindle Diameter SA/TA: 2 1/2" / 2 1/2" - Hubs: 8-bolt Options: upper beater and tandem axle Trailer Tongue Weight: 13% Tractor Requirements - PTO HP: 75
	Kuhn Knight 2044 Horizontal Beater Manure Spreader
	Push Your Old Box Spreader Aside! The 2000 Series ProPush box spreaders are designed with simplicity in mind. The hydraulic push-type design means NO apron chains, fewer moving parts, faster unloading and dependable service life. The ProPush box spreaders are designed to haul and spread solid materials from dairies and feedlots, including gutter manure, yard scrapings, bedding pack and feedlot manure. 2000 Series ProPush Benefits • The ProPush design eliminates the need for apron chains • This unique design provides smooth, dependable operation using simple hydraulic piggyback cylinders • The ProPush is designed to minimize material build-up and clean-out the entire box including the sides and floor Piggy-Back Hydraulic Cylinders • The piggy-back hydraulic cylinders and heavy-duty push panel provide ultimate simplicity for manure hauling and spreading. • The cylinder design also eliminates moving hydraulic hoses. • The welded constructed cylinder design is cleaner, more compact and stronger than competitive designs All Steel Welded Frame Construction • The all-steel welded frame construction is sturdy, reliable and specifically designed to handle the forces of the ProPush system. • This horizontal formed piece of steel runs the full length of each side of the box to provide superior strength as the push panel moves material rearward. • The frame also provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • Low profile provides easy skid steer loading. Poly Sides and Floor • The solid poly floor and sides reduce friction and promote self-cleaning to help prevent material buildup on the inside of the spreader. • The poly floor and sides also provide more strength and durability than individual tongue and groove boards and requires less power for unloading. Rooster Comb Beaters - Horizontal Rooster Comb Beaters provide a consistant spread pattern with good material break-up over the tread width of the spreader Replaceable Beater Paddles - Replaceable beater paddles allow for easier service and maintenance on horizontal beaters Removeable Beater Assembly - Horizontal or vertical beaters can be removed or installed easily for stockpiling by removing a few bolts. This is more convenient than removing beaters on a competetive spreader with welded panels VertiSpread™ • Now, the ProPush can accommodate vertical beaters that will set the standard for solid material spreading. • VertiSpread beaters can spread a high volume of material quickly while still providing a consistent 25' – 30' spread pattern. • The VertiSpread vertical beaters are designed for operators who want to spread the toughest solid industrial, dairy or feedlot material with a wider, more consistent spread pattern compared to horizontal beaters. The ProPush is a Simple, Trouble-Free Way to Spread Solid Manure • Ultimate simplicity for manure spreading • Sturdy and reliable all-steel welded frame construction • Less friction and less power required with poly sides and floor • Consistent spread pattern with rooster comb beaters • Easily removeable beaters for stockpiling Overall Length: 343" Inside Box Length: 194" Inside Box Depth: 32" Inside Box Width: 71" Overall Height - Tire Option Used: 225-80R x 22.5 - Beater: 76 - Pusher Extension or Bulkhead: 79 Loading Height: 63" Tread Width: 115" Ground clearance: 18" Unit Weight: 7620 lbs Maximum Net Load: 28,500 lbs Capacity - Cubic Feet - struck level: 270 - heaped: 440 Beaters - Number of Standard: 1 - Number of Paddles per Beater: 14 Diameter: 26" / optional 14" Lower Spinner: optional Speed - lower/upper/spinner - RPM: 365/525/430 Paddle / Flighting Thickness: 1/8" paddles Overload Protection: YES Removable Beater Assembly: YES Beater PTO Drive: - RPM - 540 or 1000 - Roller Chain-lower/upper/spinner: 80/60/60 Pusher: - Cylinder Diameter: 3 1/2" - Pusher Unload Rate @ 15 GPM: 35 sec - Pusher and Cylinder Guides: nylatron - Push Panel Thickness: 3/56" Box and Trailer Construction: - Framework Sides: structural tubing - Floor and Sides: 5/8" poly - Axle Type: Tandem - Spindles: 2 1/2" - Hubs: 8-bolt - Endgate: Standard - Diaper Pan: optional Trailer Tongue Weight: 14% Tractor Requirements - PTO HP: 120
	Kuhn Knight 2044 Vertical Beater Manure Spreader
	Push Your Old Box Spreader Aside! The 2000 Series ProPush box spreaders are designed with simplicity in mind. The hydraulic push-type design means NO apron chains, fewer moving parts, faster unloading and dependable service life. The ProPush box spreaders are designed to haul and spread solid materials from dairies and feedlots, including gutter manure, yard scrapings, bedding pack and feedlot manure. 2000 Series ProPush Benefits • The ProPush design eliminates the need for apron chains • This unique design provides smooth, dependable operation using simple hydraulic piggyback cylinders • The ProPush is designed to minimize material build-up and clean-out the entire box including the sides and floor Piggy-Back Hydraulic Cylinders • The piggy-back hydraulic cylinders and heavy-duty push panel provide ultimate simplicity for manure hauling and spreading. • The cylinder design also eliminates moving hydraulic hoses. • The welded constructed cylinder design is cleaner, more compact and stronger than competitive designs All Steel Welded Frame Construction • The all-steel welded frame construction is sturdy, reliable and specifically designed to handle the forces of the ProPush system. • This horizontal formed piece of steel runs the full length of each side of the box to provide superior strength as the push panel moves material rearward. • The frame also provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • Low profile provides easy skid steer loading. Poly Sides and Floor • The solid poly floor and sides reduce friction and promote self-cleaning to help prevent material buildup on the inside of the spreader. • The poly floor and sides also provide more strength and durability than individual tongue and groove boards and requires less power for unloading. Rooster Comb Beaters - Horizontal Rooster Comb Beaters provide a consistant spread pattern with good material break-up over the tread width of the spreader Replaceable Beater Paddles - Replaceable beater paddles allow for easier service and maintenance on horizontal beaters Removeable Beater Assembly - Horizontal or vertical beaters can be removed or installed easily for stockpiling by removing a few bolts. This is more convenient than removing beaters on a competetive spreader with welded panels VertiSpread™™ • Now, the ProPush can accommodate vertical beaters that will set the standard for solid material spreading. • VertiSpread beaters can spread a high volume of material quickly while still providing a consistent 25' – 30' spread pattern. • The VertiSpread vertical beaters are designed for operators who want to spread the toughest solid industrial, dairy or feedlot material with a wider, more consistent spread pattern compared to horizontal beaters. The ProPush is a Simple, Trouble-Free Way to Spread Solid Manure • Ultimate simplicity for manure spreading • Sturdy and reliable all-steel welded frame construction • Less friction and less power required with poly sides and floor • Consistent spread pattern with rooster comb beaters • Easily removeable beaters for stockpiling Overall Length: 356" Inside Box Length: 194" Inside Box Depth: 32" Inside Box Width: 71" Overall Height - Tire Option Used: 225-80R x 22.5 - Beater: 93 - Pusher Extension or Bulkhead: 93 Loading Height: 63" Tread Width: 115" Ground clearance: 18" Unit Weight: 9440 lbs Maximum Net Load: 28,500 lbs Capacity - Cubic Feet - struck level: 270 - heaped: 440 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 24 Teeth Diameter: 35 1/2" Lower Spinner: NA Speed - lower/upper/spinner - RPM: 420 Paddle / Flighting Thickness: 1/8" Flighting Overload Protection: YES Removable Beater Assembly: YES Beater PTO Drive: - RPM - 1000 - Roller Chain-lower/upper/spinner: enclosed gearbox Pusher: - Cylinder Diameter: 3 1/2" - Pusher Unload Rate @ 15 GPM: 35 sec - Pusher and Cylinder Guides: nylatron - Push Panel Thickness: 3/16" Box and Trailer Construction: - Framework Sides: structural tubing - Floor and Sides: 5/8" poly - Axle Type: Tandem - Spindles: 2 1/2" - Hubs: 8-bolt - Endgate: Standard - Diaper Pan: NA Trailer Tongue Weight: 13% Tractor Requirements - PTO HP: 140
	Kuhn Knight 2054 Horizontal Beater Manure Spreader
	Push Your Old Box Spreader Aside! The 2000 Series ProPush box spreaders are designed with simplicity in mind. The hydraulic push-type design means NO apron chains, fewer moving parts, faster unloading and dependable service life. The ProPush box spreaders are designed to haul and spread solid materials from dairies and feedlots, including gutter manure, yard scrapings, bedding pack and feedlot manure. 2000 Series ProPush Benefits • The ProPush design eliminates the need for apron chains • This unique design provides smooth, dependable operation using simple hydraulic piggyback cylinders • The ProPush is designed to minimize material build-up and clean-out the entire box including the sides and floor Piggy-Back Hydraulic Cylinders • The piggy-back hydraulic cylinders and heavy-duty push panel provide ultimate simplicity for manure hauling and spreading. • The cylinder design also eliminates moving hydraulic hoses. • The welded constructed cylinder design is cleaner, more compact and stronger than competitive designs All Steel Welded Frame Construction • The all-steel welded frame construction is sturdy, reliable and specifically designed to handle the forces of the ProPush system. • This horizontal formed piece of steel runs the full length of each side of the box to provide superior strength as the push panel moves material rearward. • The frame also provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • Low profile provides easy skid steer loading. Poly Sides and Floor • The solid poly floor and sides reduce friction and promote self-cleaning to help prevent material buildup on the inside of the spreader. • The poly floor and sides also provide more strength and durability than individual tongue and groove boards and requires less power for unloading. Rooster Comb Beaters - Horizontal Rooster Comb Beaters provide a consistant spread pattern with good material break-up over the tread width of the spreader Replaceable Beater Paddles - Replaceable beater paddles allow for easier service and maintenance on horizontal beaters Removeable Beater Assembly - Horizontal or vertical beaters can be removed or installed easily for stockpiling by removing a few bolts. This is more convenient than removing beaters on a competetive spreader with welded panels VertiSpread™™ • Now, the ProPush can accommodate vertical beaters that will set the standard for solid material spreading. • VertiSpread beaters can spread a high volume of material quickly while still providing a consistent 25' – 30' spread pattern. • The VertiSpread vertical beaters are designed for operators who want to spread the toughest solid industrial, dairy or feedlot material with a wider, more consistent spread pattern compared to horizontal beaters. The ProPush is a Simple, Trouble-Free Way to Spread Solid Manure • Ultimate simplicity for manure spreading • Sturdy and reliable all-steel welded frame construction • Less friction and less power required with poly sides and floor • Consistent spread pattern with rooster comb beaters • Easily removable beaters for stockpiling Overall Length: 343" Inside Box Length: 198" Inside Box Depth: 47" Inside Box Width: 71" Overall Height - Tire Option Used: 425-65R x 22.5 - Beater: 91 - Pusher Extension or Bulkhead: 103 Loading Height: 85" Tread Width: 121" Ground clearance: 18" Unit Weight: 10,900 lbs Maximum Net Load: 35,000 lbs Capacity - Cubic Feet - struck level: 400 - heaped: 540 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 14 Paddles Diameter: 24" / 24" Lower Spinner: optional Speed - lower/upper/spinner - RPM: 410/410/410 Paddle / Flighting Thickness: 1/2" paddles Overload Protection: YES Removable Beater Assembly: YES Beater PTO Drive: - RPM - 1000 - Roller Chain-lower/upper/spinner: 80/80/60 Pusher: - Cylinder Diameter: 4 1/2" - Pusher Unload Rate @ 15 GPM: 55 sec - Pusher and Cylinder Guides: nylatron - Push Panel Thickness: 3/16" Box and Trailer Construction: - Framework Sides: structural tubing - Floor and Sides: 5/8" poly - Axle Type: Tandem - Spindles: 3 3/8" - Hubs: 10-bolt - Endgate: Standard - Diaper Pan: optional Trailer Tongue Weight: 15% Tractor Requirements - PTO HP: 140
	Kuhn Knight 2054 Vetical Beater Manure Spreader
	Push Your Old Box Spreader Aside! The 2000 Series ProPush box spreaders are designed with simplicity in mind. The hydraulic push-type design means NO apron chains, fewer moving parts, faster unloading and dependable service life. The ProPush box spreaders are designed to haul and spread solid materials from dairies and feedlots, including gutter manure, yard scrapings, bedding pack and feedlot manure. 2000 Series ProPush Benefits • The ProPush design eliminates the need for apron chains • This unique design provides smooth, dependable operation using simple hydraulic piggyback cylinders • The ProPush is designed to minimize material build-up and clean-out the entire box including the sides and floor Piggy-Back Hydraulic Cylinders • The piggy-back hydraulic cylinders and heavy-duty push panel provide ultimate simplicity for manure hauling and spreading. • The cylinder design also eliminates moving hydraulic hoses. • The welded constructed cylinder design is cleaner, more compact and stronger than competitive designs All Steel Welded Frame Construction • The all-steel welded frame construction is sturdy, reliable and specifically designed to handle the forces of the ProPush system. • This horizontal formed piece of steel runs the full length of each side of the box to provide superior strength as the push panel moves material rearward. • The frame also provides a solid framework and includes a reinforced tongue that pulls directly from the full-width axle. • Low profile provides easy skid steer loading. Poly Sides and Floor • The solid poly floor and sides reduce friction and promote self-cleaning to help prevent material buildup on the inside of the spreader. • The poly floor and sides also provide more strength and durability than individual tongue and groove boards and requires less power for unloading. Rooster Comb Beaters - Horizontal Rooster Comb Beaters provide a consistant spread pattern with good material break-up over the tread width of the spreader Replaceable Beater Paddles - Replaceable beater paddles allow for easier service and maintenance on horizontal beaters Removeable Beater Assembly - Horizontal or vertical beaters can be removed or installed easily for stockpiling by removing a few bolts. This is more convenient than removing beaters on a competetive spreader with welded panels VertiSpread™™ • Now, the ProPush can accommodate vertical beaters that will set the standard for solid material spreading. • VertiSpread beaters can spread a high volume of material quickly while still providing a consistent 25' – 30' spread pattern. • The VertiSpread vertical beaters are designed for operators who want to spread the toughest solid industrial, dairy or feedlot material with a wider, more consistent spread pattern compared to horizontal beaters. The ProPush is a Simple, Trouble-Free Way to Spread Solid Manure • Ultimate simplicity for manure spreading • Sturdy and reliable all-steel welded frame construction • Less friction and less power required with poly sides and floor • Consistent spread pattern with rooster comb beaters • Easily removable beaters for stockpiling Overall Length: 357" Inside Box Length: 198" Inside Box Depth: 47" Inside Box Width: 71" Overall Height - Tire Option Used: 425-65R x 22.5 - Beater: 116 - Pusher Extension or Bulkhead: 114 Loading Height: 85" Tread Width: 121" Ground clearance: 18" Unit Weight: 12,520 lbs Maximum Net Load: 35,000 lbs Capacity - Cubic Feet - struck level: 400 - heaped: 540 Beaters - Number of Standard: 2 - Number of Paddles per Beater: 32 Teeth Diameter: 35 1/2" Lower Spinner: NA Speed - lower/upper/spinner - RPM: 420 Paddle / Flighting Thickness: 1/8" flighting Overload Protection: YES Removable Beater Assembly: YES Beater PTO Drive: - RPM - 1000 - Roller Chain-lower/upper/spinner: enclosed gearbox Pusher: - Cylinder Diameter: 4 1/2" - Pusher Unload Rate @ 15 GPM: 55 sec - Pusher and Cylinder Guides: nylatron - Push Panel Thickness: 3/16" Box and Trailer Construction: - Framework Sides: structural tubing - Floor and Sides: 5/8" poly - Axle Type: Tandem - Spindles: 3 3/8" - Hubs: 10-bolt - Endgate: Standard - Diaper Pan: NA Trailer Tongue Weight: 14% Tractor Requirements - PTO HP: 160
	Kuhn Knight 8110 TR Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 213" Inside Hopper Length: 144" Top Inside Hopper Width: 56" Overall Height: - Tire Option Used: 14x16.1 - Single Axle: 53" - Tandem Axle: NA - w/wood rails: 57" - w/splash guards: 62" - w/wood rails & splash guards: 66" - w/lid: NA Overall width w/Bedder Spreader(option): 99" Tread Width: 80" Unit Weight: 3740 lbs Max Net Load: 10,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 871 / 1008 - Cubic Feet (Struck level): 116 / 135 - Cubic Yards (Struck level): 4 / 5 Augers - Diameter: 20" L & 14" R - Flighting Thickness: 3/8" Helicoid Tube Diameter - L/R: 8 5/8" / 5 9/16" - Drive Shaft Diameter - L/R: 3 1/2" / 3" - Shear Paddles: no Drive - PTO-RPM: 540 - PTO Protection: friction-clutch - Roller Chain - augers: 60-100-80 - Roller Chain - discharge: 60H - Enclosed Front Oil Bath: no Hammer Expeller and Hammers - Expeller RPM: 810 - Expeller Shaft Diameter: 2" - Expeller Swing Diameter: 20" - Number of Hammers: 12 Box Construction - thickness - Hopper Bottom: 7 GA. - Front Panel: 10 GA. - Rear Panel / Side Panels: 10 GA. - Door Opening Size: 18" x 30" Axle Type: SA Spindle Diameter - SA/TA/HF: 2 1/2" / NA / NA Hub: 8-bolt Tongue Size: 4" x 6" Tongue Weight - % gross: 10% Tractor Requirement - PTO: 60
	Kuhn Knight 8114 TR Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 245" Inside Hopper Length: 168" Top Inside Hopper Width: 64" Overall Height: - Tire Option Used: 14x16.1 (SA) - Single Axle: 57" - Tandem Axle: 61 - w/wood rails: 61 SA / 65 TA - w/splash guards: 66 SA / 70 TA - w/wood rails & splash guards: 70 SA / 74 TA - w/lid: NA Overall width w/Bedder Spreader(option): 110" Tread Width: 96 (SA) Unit Weight: 4600 lbs Max Net Load: 15,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 1241 / 1426 - Cubic Feet (Struck level): 165 / 90 - Cubic Yards (Struck level): 6 / 7 Augers - Diameter: 20" L & 18" R - Flighting Thickness: 3/8" Helicoid Tube Diameter - L/R: 8 5/8" / 5 9/16" - Drive Shaft Diameter - L/R: 3 1/2" / 3" - Shear Paddles: no Drive - PTO-RPM: 540 - PTO Protection: friction-clutch - Roller Chain - augers: 60-100-80 - Roller Chain - discharge: 60H - Enclosed Front Oil Bath: no Hammer Expeller and Hammers - Expeller RPM: 810 - Expeller Shaft Diameter: 2" - Expeller Swing Diameter: 20" - Number of Hammers: 12 Box Construction - thickness - Hopper Bottom: 7 GA. - Front Panel: 10 GA. - Rear Panel / Side Panels: 10 GA. - Door Opening Size: 18" x 30" Axle Type: SA Spindle Diameter - SA/TA/HF: 3" / 2 1/2" / NA Hub: 8-bolt Tongue Size: 4" x 6" Tongue Weight - % gross: 10% Tractor Requirement - PTO: 80
	Kuhn Knight 8118 TK Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 216" Inside Hopper Length: 192" Top Inside Hopper Width: 73" Overall Height: - Tire Option Used: NA - Single Axle: 92" - Tandem Axle: 92" - w/wood rails: NA - w/splash guards: 101" - w/wood rails & splash guards: NA - w/lid: 113" Overall width w/Bedder Spreader(option): 111" Tread Width: 96" Unit Weight: 5618 lbs Max Net Load: 18,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 1818 / NA - Cubic Feet (Struck level): 242 / NA - Cubic Yards (Struck level): 9 / NA Augers - Diameter: 20" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 5 9/16" - Drive Shaft Diameter - L/R: 3 1/2" / 3" - Shear Paddles: no Drive - PTO-RPM: 540/1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-80-120-100 - Roller Chain - discharge: 60H - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 845/870 - Expeller Shaft Diameter: 2 1/2" - Expeller Swing Diameter: 20" - Number of Hammers: 15 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 7 GA. - Rear Panel / Side Panels: 10 GA. - Door Opening Size: 18" x 39" Axle Type: TA Spindle Diameter - SA/TA/HF: NA / 2 1/2" / NA Hub: 8-bolt Tongue Size: 6" x 6" Tongue Weight - % gross: 11% Tractor Requirement - PTO: 100
	Kuhn Knight 8118 TR Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 274" Inside Hopper Length: 192" Top Inside Hopper Width: 73" Overall Height: - Tire Option Used: 16.5x16.1 - Single Axle: NA" - Tandem Axle: 69" - w/wood rails: NA - w/splash guards: 79" - w/wood rails & splash guards: NA - w/lid: 92" Overall width w/Bedder Spreader(option): 114" Tread Width: 98" Unit Weight: 7150 lbs Max Net Load: 18,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 1818 / NA - Cubic Feet (Struck level): 242 / NA - Cubic Yards (Struck level): 9 / NA Augers - Diameter: 20" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 5 9/16" - Drive Shaft Diameter - L/R: 3 1/2" / 3" - Shear Paddles: no Drive - PTO-RPM: 540/1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-80-120-100 - Roller Chain - discharge: 60H - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 845/870 - Expeller Shaft Diameter: 2 1/2" - Expeller Swing Diameter: 20" - Number of Hammers: 15 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 7 GA. - Rear Panel / Side Panels: 10 GA. - Door Opening Size: 18" x 39" Axle Type: TA Spindle Diameter - SA/TA/HF: NA / 2 1/2" / NA Hub: 8-bolt Tongue Size: 6" x 6" Tongue Weight - % gross: 11% Tractor Requirement - PTO: 100
	Kuhn Knight 8124 TK Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 216" Inside Hopper Length: 192" Top Inside Hopper Width: 82" Overall Height: - Tire Option Used: NA - Single Axle: 102" - Tandem Axle: 102" - w/wood rails: NA - w/splash guards: 111" - w/wood rails & splash guards: NA - w/lid: 122" Overall width w/Bedder Spreader(option): 111" Tread Width: 96" Unit Weight: 5856 lbs Max Net Load: 24,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 2417 / NA - Cubic Feet (Struck level): 323 / NA - Cubic Yards (Struck level): 12 / NA Augers - Diameter: 20" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 5 9/16" - Drive Shaft Diameter - L/R: 3 1/2" / 3" - Shear Paddles: no Drive - PTO-RPM: 540/1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-80-120-100 - Roller Chain - discharge: 60H - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 845/870 - Expeller Shaft Diameter: 2 1/2" - Expeller Swing Diameter: 20" - Number of Hammers: 15 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 7 GA. - Rear Panel / Side Panels: 10 GA. - Door Opening Size: 18" x 39" Axle Type: TA Spindle Diameter - SA/TA/HF: NA / 3" / NA Hub: HD 8-bolt Tongue Size: 6" x 8" Tongue Weight - % gross: 11% Tractor Requirement - PTO: 120
	Kuhn Knight 8124 TR Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 274" Inside Hopper Length: 192" Top Inside Hopper Width: 82" Overall Height: - Tire Option Used: 19x16.1 - Single Axle: NA" - Tandem Axle: 79" - w/wood rails: NA - w/splash guards: 89" - w/wood rails & splash guards: NA - w/lid: 100" Overall width w/Bedder Spreader(option): 114" Tread Width: 102" Unit Weight: 7800 lbs Max Net Load: 24,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 2417 / NA - Cubic Feet (Struck level): 323 / NA - Cubic Yards (Struck level): 12 / NA Augers - Diameter: 20" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 5 9/16" - Drive Shaft Diameter - L/R: 3 1/2" / 3" - Shear Paddles: no Drive - PTO-RPM: 540/1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-80-120-100 - Roller Chain - discharge: 60H - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 845/870 - Expeller Shaft Diameter: 2 1/2" - Expeller Swing Diameter: 20" - Number of Hammers: 15 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 7 GA. - Rear Panel / Side Panels: 10 GA. - Door Opening Size: 18" x 39" Axle Type: TA Spindle Diameter - SA/TA/HF: NA / 3" / NA Hub: HD 8-bolt Tongue Size: 6" x 8" Tongue Weight - % gross: 11% Tractor Requirement - PTO: 120
	Kuhn Knight 8132 TK Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 220" Inside Hopper Length: 192" Top Inside Hopper Width: 90" Overall Height: - Tire Option Used: NA - Single Axle: NA" - Tandem Axle: 110" - w/wood rails: NA - w/splash guards: 119" - w/wood rails & splash guards: NA - w/lid: 133" Overall width w/Bedder Spreader(option): 117" Tread Width: 96" Unit Weight: 7,850 lbs Max Net Load: 32,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 3251 / NA - Cubic Feet (Struck level): 435 / NA - Cubic Yards (Struck level): 16 / NA Augers - Diameter: 24" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 8 5/8" - Drive Shaft Diameter - L/R: 4" / 3 1/2" - Shear Paddles: yes Drive - PTO-RPM: CV - 1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-100-140-120 - Roller Chain - discharge: 80 - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 833 - Expeller Shaft Diameter: 2 1/2" - Expeller Swing Diameter: 20" - Number of Hammers: 15 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 1/4". - Rear Panel / Side Panels: 7 GA. - Door Opening Size: 18" x 39" Axle Type: TA / HF Spindle Diameter - SA/TA/HF: NA / 3 3/8" / 4 1/2" Hub: 10-bolt Tongue Size: 8" x 8" Tongue Weight - % gross: 12% Tractor Requirement - PTO: 140
	Kuhn Knight 8132 TR Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 274" Inside Hopper Length: 192" Top Inside Hopper Width: 90" Overall Height: - Tire Option Used: 21.5x16.1 - Single Axle: NA" - Tandem Axle: 92" - w/wood rails: NA - w/splash guards: 101" - w/wood rails & splash guards: NA - w/lid: 115" Overall width w/Bedder Spreader(option): 122" Tread Width: 114" Unit Weight: 10,460 lbs Max Net Load: 32,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 3251 / NA - Cubic Feet (Struck level): 435 / NA - Cubic Yards (Struck level): 16 / NA Augers - Diameter: 24" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 8 5/8" - Drive Shaft Diameter - L/R: 4" / 3 1/2" - Shear Paddles: yes Drive - PTO-RPM: CV - 1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-100-140-120 - Roller Chain - discharge: 80 - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 833 - Expeller Shaft Diameter: 2 1/2" - Expeller Swing Diameter: 20" - Number of Hammers: 15 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 1/4". - Rear Panel / Side Panels: 7 GA. - Door Opening Size: 18" x 39" Axle Type: TA / HF Spindle Diameter - SA/TA/HF: NA / 3 3/8" / 4 1/2" Hub: 10-bolt Tongue Size: 8" x 8" Tongue Weight - % gross: 12% Tractor Requirement - PTO: 140
	Kuhn Knight 8141 TK Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 264" Inside Hopper Length: 240" Top Inside Hopper Width: 90" Overall Height: - Tire Option Used: NA - Single Axle: NA" - Tandem Axle: 110" - w/wood rails: NA - w/splash guards: 119" - w/wood rails & splash guards: NA - w/lid: 133" Overall width w/Bedder Spreader(option): 117" Tread Width: 96" Unit Weight: 10,325 lbs Max Net Load: 40,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 4060 / NA - Cubic Feet (Struck level): 543 / NA - Cubic Yards (Struck level): 20 / NA Augers - Diameter: 24" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 8 5/8" - Drive Shaft Diameter - L/R: 4" / 3 1/2" - Shear Paddles: yes Drive - PTO-RPM: CV - 1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-100-140-120 - Roller Chain - discharge: 80 - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 833 - Expeller Shaft Diameter: 2 1/2" - Expeller Swing Diameter: 20" - Number of Hammers: 18 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 1/4". - Rear Panel / Side Panels: 7 GA. - Door Opening Size: 18" x 47" Axle Type: HF Spindle Diameter - SA/TA/HF: NA / NA / 4 1/2" Hub: HD 10-bolt Tongue Size: 8" x 10" Tongue Weight - % gross: 12% Tractor Requirement - PTO: 180
	Kuhn Knight 8141 TR Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 322" Inside Hopper Length: 240" Top Inside Hopper Width: 90" Overall Height: - Tire Option Used: 28Lx26 - Single Axle: NA" - Tandem Axle: 93" - w/wood rails: NA - w/splash guards: 102" - w/wood rails & splash guards: NA - w/lid: 116" Overall width w/Bedder Spreader(option): 136" Tread Width: 136" Unit Weight: 15,340 lbs Max Net Load: 40,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 4060 / NA - Cubic Feet (Struck level): 543 / NA - Cubic Yards (Struck level): 20 / NA Augers - Diameter: 24" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 8 5/8" - Drive Shaft Diameter - L/R: 4" / 3 1/2" - Shear Paddles: yes Drive - PTO-RPM: CV - 1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-100-140-120 - Roller Chain - discharge: 80 - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 833 - Expeller Shaft Diameter: 2 1/2" - Expeller Swing Diameter: 20" - Number of Hammers: 18 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 1/4". - Rear Panel / Side Panels: 7 GA. - Door Opening Size: 18" x 47" Axle Type: HF Spindle Diameter - SA/TA/HF: NA / NA / 4 1/2" Hub: HD 10-bolt Tongue Size: 8" x 10" Tongue Weight - % gross: 12% Tractor Requirement - PTO: 180
	Kuhn Knight 8150 TR Manure Spreader
	8100 Series ProTwin Slinger Manure Spreaders The ProTwin Slinger features the patented twin-auger design that provides an even and consistent material flow to the discharge. The left auger moves the material forward to the hammer discharge and the raised right auger moves the material rearward while keeping the left auger charged. When the material enters the hammer discharge, each hammer swings down into the material, peeling it off, pulverizing it, and slinging it underhand into an even and controlled spread pattern. Get the Farm Equipment with the Kuhn Knight ProTwin Slinger Advantage: Even and controlled spread pattern Eliminates material bridging Spreads the widest variety of material Simple and dependable Versatile, multipurpose unit Spreads the Widest Variety of Materials - Ranging from Beef and Dairy Cattle Manure to Industrial and Solid Waste Gutter manure Slurry Penpack Yard scrapings Sand-laden manure Bedding materials Now More Versatile with the Bedder Spreader Even distribution of manure or bedding Fast, efficient and convenient operation Even distribution of bedding Saves time, labor and bedding Dual purpose - spreader or bedder Side/Top Dressing: Side or top dressing can be applied in orchards, on turf grass, or other applications that need fertilizer, soil amendments or erosion control for grass establishment. Bedding: Bed open drylots, maternity pens, and loafing barns. The Bedder Spreader is ideal for filling open housing with straw, corn fodder or other bedding materials. Mulching: Mulch or compost can be applied to orchards, nurseries, new seeding, golf courses or any other application that needs soil moisture maintained and weed growth reduced. Farm Equipment with Innovative Material-Flow Design Examine the material flow in the illustration on the right and note that the left auger moves material forward to the discharge hammers. The slightly raised right auger moves the material rearward while keeping the left auger evenly charged with material. It is this patented circulating action that makes the ProTwin so effective in handling the toughest material encountered in most applications. Hammer Discharge with Forged-Steel Hammers Universal hammers eliminate the need for separate left, right, or center hammers and improve the spread pattern, especially when spreading penpack. The entire hammer is through hardened to reduce wear, which increases the life of the hammer. Overall Length: 324" Inside Hopper Length: 240" Top Inside Hopper Width: 96" Overall Height: - Tire Option Used: 30.5Lx32 - Single Axle: NA" - Tandem Axle: 103" - w/wood rails: NA - w/splash guards: 112" - w/wood rails & splash guards: NA - w/lid: 127" Overall width w/Bedder Spreader(option): 139" Tread Width: 139" Unit Weight: 19,640 lbs Max Net Load: 50,000 lbs Capacity - w/o rails / w/4: rails - Gallons (Struck level): 5000 / NA - Cubic Feet (Struck level): 668 / NA - Cubic Yards (Struck level): 25 / NA Augers - Diameter: 24" - Flighting Thickness: 3/8" Sectional Tube Diameter - L/R: 8 5/8" / 8 5/8" - Drive Shaft Diameter - L/R: 4" / 3 1/2" - Shear Paddles: yes Drive - PTO-RPM: CV - 1000 - PTO Protection: torque disconnect - Roller Chain - augers: 60-100-140-120 - Roller Chain - discharge: 80 - 2 - Enclosed Front Oil Bath: yes Hammer Expeller and Hammers - Expeller RPM: 694 - Expeller Shaft Diameter: 3" - Expeller Swing Diameter: 24" - Number of Hammers: 18 Box Construction - thickness - Hopper Bottom: 1/4" - Front Panel: 1/4". - Rear Panel / Side Panels: 7 GA. - Door Opening Size: 22" x 47" Axle Type: HF Spindle Diameter - SA/TA/HF: NA / NA / 5" Hub: XHD 10-bolt Tongue Size: 8" x 10" Tongue Weight - % gross: 8% Tractor Requirement - PTO: 225
	Kuhn Knight ProPush 2044 Manure Spreader
	The 2000 Series ProPush box spreaders are designed with simplicity in mind - The hydraulic push-type design means NO apron chains, fewer moving parts, faster unloading and dependable service life - The ProPush box spreaders are designed to haul and spread solid materials from dairies and feedlots, including gutter manure, yard scrapings, bedding pack and feedlot manure - The ProPush box spreaders feature an all-steel welded box construction, solid poly floor and sides, piggyback hydraulic cylinders and removable beaters - Now, the ProPush can accommodate vertical beaters that will set the standard for solid material spreading. Capacity (m3): 12.5 Capacity (cu.ft): 440 PTO speed (rpm): 1000 PTO protection: Yes Overall height (cm): 239 Overall height (inch): 94 Tread width (cm): 290 Tread width (inch): 114 Weight in kg: 4282 Weight in lbs: 9440 Maximum load (kg): 12927 Maximum load (lb): 28500 Minimum power requirement for PTO (hp): 140 Beaters - number standard: 2 Beater diameter - lower (cm): 90 Beater diameter - lower (inch): 35.5 Loading height (cm): 160 Loading height (inch): 63 Box width - inside (cm): 180 Box width - inside (inch): 71
	Kuhn Knight ProPush 2054 Manure Spreader
	The 2000 Series ProPush box spreaders are designed with simplicity in mind - The hydraulic push-type design means NO apron chains, fewer moving parts, faster unloading and dependable service life - The ProPush box spreaders are designed to haul and spread solid materials from dairies and feedlots, including gutter manure, yard scrapings, bedding pack and feedlot manure - The ProPush box spreaders feature an all-steel welded box construction, solid poly floor and sides, piggyback hydraulic cylinders and removable beaters - Now, the ProPush can accommodate vertical beaters that will set the standard for solid material spreading. Capacity (m3): 15.3 Capacity (cu.ft): 540 PTO speed (rpm): 1000 PTO protection: Yes Overall height (cm): 272 Overall height (inch): 107 Tread width (cm): 307 Tread width (inch): 121 Weight in kg: 5679 Weight in lbs: 12520 Maximum load (kg): 15875 Maximum load (lb): 35000 Minimum power requirement for PTO (hp): 140 Beaters - number standard: 2 Beater diameter - lower (cm): 90 Beater diameter - lower (inch): 35.5 Removeable beater assembly: yes Loading height (cm): 160 Loading height (inch): 85 Box width - inside (cm): 180 Box width - inside (inch): 71
	Kuhn Knight ProSpread Apron Box 1130 Manure Spreader
	The ProSpread box spreaders are designed to haul and spread solid materials from feedlot and dairy operations - These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen - This unit features all-steel welded box construction, two-piece solid poly floor, rooster comb beaters, overrunning clutch, and a variable-speed apron drive - If you want a dependable, high performance unit for spreading or stockpiling, the ProSpread apron box spreader is what you need for your operation. Capacity (m3): 9 Capacity (cu.ft): 320 PTO speed (rpm): 540 or 1000 PTO protection: yes Overall height (cm): 188 Overall height (inch): 74 Tread width (cm): 259 Tread width (inch): 102 Weight in kg: 1869 Weight in lbs: 4120 Maximum load (kg): 9525 Maximum load (lb): 21000 Minimum power requirement for PTO (hp): 75 Beaters - number standard: 1 Beater diameter - lower (cm): 66 Beater diameter - lower (inch): 26 Removeable beater assembly: no Loading height (cm): 145 Loading height (inch): 57 Box width - inside (cm): 168 Box width - inside (inch): 66
	Kuhn Knight ProSpread Apron Box 1140 Manure Spreader
	The ProSpread box spreaders are designed to haul and spread solid materials from feedlot and dairy operations - These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen - This unit features all-steel welded box construction, two-piece solid poly floor, rooster comb beaters, overrunning clutch, and a variable-speed apron drive - If you want a dependable, high performance unit for spreading or stockpiling, the ProSpread apron box spreader is what you need for your operation. Capacity (m3): 10.5 Capacity (cu.ft): 380 PTO speed (rpm): 540 or 1000 PTO protection: yes Overall height (cm): 198 Overall height (inch): 78 Tread width (cm): 259 Tread width (inch): 102 Weight in kg: 2368 Weight in lbs: 5220 Maximum load (kg): 11340 Maximum load (lb): 25000 Minimum power requirement for PTO (hp): 90 Beaters - number standard: 1 Beater diameter - lower (cm): 66 Beater diameter - lower (inch): 26 Removeable beater assembly: no Loading height (cm): 164 Loading height (inch): 64.5 Box width - inside (cm): 168 Box width - inside (inch): 66
	Kuhn Knight ProSpread Apron Box 1150 Manure Spreader
	The ProSpread box spreaders are designed to haul and spread solid materials from feedlot and dairy operations - These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen - This unit features all-steel welded box construction, two-piece solid poly floor, rooster comb beaters, overrunning clutch, and a variable-speed apron drive - If you want a dependable, high performance unit for spreading or stockpiling, the ProSpread apron box spreader is what you need for your operation. Capacity (m3): 14 Capacity (cu.ft): 500 PTO speed (rpm): 540 or 1000 PTO protection: yes Overall height (cm): 211 Overall height (inch): 83 Tread width (cm): 318 Tread width (inch): 125 Weight in kg: 3248 Weight in lbs: 7160 Maximum load (kg): 14968 Maximum load (lb): 33000 Minimum power requirement for PTO (hp): 120 Beaters - number standard: 2 Beater diameter - lower (cm): 51 Beater diameter - lower (inch): 20 Removeable beater assembly: no Loading height (cm): 185 Loading height (inch): 73 Box width - inside (cm): 183 Box width - inside (inch): 72
	Kuhn Knight ProSpread Apron Box 1159 Manure Spreader
	The ProSpread box spreaders are designed to haul and spread solid materials from feedlot and dairy operations - These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen - This unit features all-steel welded box construction, two-piece solid poly floor, rooster comb beaters, overrunning clutch, and a variable-speed apron drive - If you want a dependable, high performance unit for spreading or stockpiling, the ProSpread apron box spreader is what you need for your operation. Capacity (m3): 16.7 Capacity (cu.ft): 590 PTO speed (rpm): 1000 PTO protection: yes Overall height (cm): 218 Overall height (inch): 86 Tread width (cm): 318 Tread width (inch): 125 Weight in kg: 4309 Weight in lbs: 9500 Maximum load (kg): 17936 Maximum load (lb): 38000 Minimum power requirement for PTO (hp): 140 Beaters - number standard: 2 Beater diameter - lower (cm): 51 Beater diameter - lower (inch): 20 Removeable beater assembly: yes Loading height (cm): 211 Loading height (inch): 83 Box width - inside (cm): 183 Box width - inside (inch): 72
	Kuhn Knight ProSpread Apron Box 1160 Manure Spreader
	The ProSpread box spreaders are designed to haul and spread solid materials from feedlot and dairy operations - These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen - This unit features all-steel welded box construction, two-piece solid poly floor, rooster comb beaters, overrunning clutch, and a variable-speed apron drive - If you want a dependable, high performance unit for spreading or stockpiling, the ProSpread apron box spreader is what you need for your operation. Capacity (m3): 17.7 Capacity (cu.ft): 625 PTO speed (rpm): 1000 PTO protection: yes Overall height (cm): 285 Overall height (inch): 112 Tread width (cm): 254 Tread width (inch): 100 Weight in kg: 5897 Weight in lbs: 13000 Minimum power requirement for PTO (hp): 140 Beaters - number standard: 2 Beater diameter - lower (cm): 51 Beater diameter - lower (inch): 20 Loading height (cm): 254 Loading height (inch): 100 Box width - inside (cm): 208 Box width - inside (inch): 82
	Kuhn Knight ProSpread Apron Box 1170 V Manure Spreader
	The ProSpread box spreaders are designed to haul and spread solid materials from feedlot and dairy operations - These spreaders are built with tough, quality components to meet the rigorous demands of dairymen and cattlemen - This unit features all-steel welded box construction, two-piece solid poly floor, rooster comb beaters, overrunning clutch, and a variable-speed apron drive - If you want a dependable, high performance unit for spreading or stockpiling, the ProSpread apron box spreader is what you need for your operation. Capacity (m3): 19.5 Capacity (cu.ft): 690 PTO speed (rpm): 1000 PTO protection: yes Overall height (cm): 277 Overall height (inch): 109 Tread width (cm): 244 Tread width (inch): 96 Weight in kg: 5432 Weight in lbs: 11975 Beaters - number standard: 2 Beater diameter - lower (cm): 51 Beater diameter - lower (inch): 20 Loading height (cm): 246 Loading height (inch): 96 Box width - inside (cm): 208 Box width - inside (inch): 82

[Back to the top]